DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
Desco.comPHONE (909) 627-8178
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
DRAWING
NUMBER
13405
DATE:
March
2014
2014 DESCO INDUSTRIES INC.
Employee Owned
STATSHIELD BAG, SHIELDING, METAL-IN, 0.0030" (0.0762mm)
Side Weld Seals 3/8 in. (±0.10)
Mixed Unsortable Plastic Scrap
Mixed unsortable plastic scrap shall contain assorted plastics
of multiple grades that are co-extruded, bonded or laminated
together which are unsortable into individual grades
Desco’s bags are recyclable
7
STATSHIELD METAL-IN SHIELDING BAG
Meets the required limits of ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static
Control Bag standard ANSI/ESD S11.4-2012 Level 3.
Specifications:
Electrical Properties
Typical Values
Test Procedures/Method
Surface Resistance:
Outer Surface
1 x 104 to < 1 x 1011 ohms
ANSI/ESD STM11.11
Inner Surface
1 x 104 to < 1 x 1011 ohms
ANSI/ESD STM11.11
Discharge Shielding
<20 nJ
ANSI/ESD STM11.31, EIA 541
Charge Generation
Teflon: 0.09 nC/sq. in.
Modified Incline Plane
Quartz: 0.01 nC/sq. in.
Modified Incline Plane
Capacitance Probe (to dissipate 1 KV) <30 volts
ANSI/EIA-541/Appendix E, 1kV Discharge
Physical Properties
Bag Thickness:
Thickness
Nominal 0.0030" (.0762mm) ±10%
MIL-STD-3010, 1003
Width (Inside Dimensions)
Nominal -0" / + 0.125"
Length (Inside Dimensions)
Nominal ± 0.125"
Light Transmission
>40% (Tobias)
ASTM D-1003
Heat Seal
>10 lbs/in
375°F, 1/2 sec 60 psi
Tensile
9000 PSI
ASTM D882
Puncture Resistance
>10 lbs
MIL-STD-3010, 2065
MVTR
<0.40
FTMS 101C/2065
Non-corrosive
Pass
MIL-STD-3010, M3005
Chemical Properties
Corrosion
No effect on aluminum, copper, silver, Sn-Pb coated foil,
stainless steel, low carbon steel
Polycarbonate Capability,
Yes
Bag is free of amines, N-octanoic acid, silicones and heavy metals.
Low Charging Static
Dissipative Proprietary
Outer Polyester Layer
Aluminum Shielding Layer
Low Charging Static
Dissipative Proprietary
Inner Polyethylene Layer
*Film made in USA or Malaysia
Specifications and procedures subject to change without notice.
Date & Lot Code
Printed for QC
Traceablility
Statshield bags are packaged 100 per package in an oversized shielding bag.
See Shielding Bag Storage at TB-7057. The bag’s material meets the required limits of ANSI/ESD S541 per ANSI/ESD S20.20.
Statshield and Statfree are Registered Trademarks of Desco Industries Inc. See Bag Selection Chart Click HERE. ANSI/ESD S541 Section 6.2 Outside an EPA
“Transportation of sensitive products outside of an EPA shall require packaging that provides:
1. Low charge generation
2. Dissipative or conductive materials for intimate contact
3. A structure that provides electrostatic discharge shielding.”
RoHS 2 and REACH Compliance Statement
None of the RoHS 2 restricted materials or REACH substances of very high concern as of
2013/06/20 are intentionally added in manufacturing this product. Ref: European Union Directive
*Made in the
United States of America
