詳細信息
一．電器性能規(guī)格 ＥLECTRICAL CHARACTERISTICS | |
測試條件 Test Conditions | |
在微小電流(100mA )以下測試 Measured at small l current (100mA or less) 1000HZ | |
輸入500V電壓1分鐘,按以下方式測試:Apply a voltage of 250V DC for 1 min to following portions after mhich measurement shall be made: (1) 塑膠體與針腳之間 (1)Between body and conductor (2) 不接觸的針腳之間 (2)Between conductor not to be contact | |
輸入AC500V(50-60HZ)電壓,1分鐘感應(yīng)電流為0.5MA,按以下方法測試: AC 250V ims(50-60HZ) for 1 min trip current: 0.5 mA (1)塑膠體與排腳之間 (1)Between terminals (2)不接觸的排腳之間: (2)Between individual terminals and frame | |
-25℃----+75℃ | |
在沒有指定的情況下測試溫度,濕度,氣壓如下: Unless otherwise specified , the stardard range or atmospheric conditions for making measurements and tests are as follows (1) 溫度為5℃--35℃ (1)Ambient temperature:5℃to 35℃ (2) 濕度為45%--85% (2)Relative humidity :45% to 85% (3) 氣壓為80KPA----106KPA (3)Air pressure : 80Kpa to 106Kpa | |
二.機械性能規(guī)格 MECHANICAL CHARACTERISTICS | |
在排腳前端任意一個方向的先端加上300克力力度測試，時間為15秒 A static load of 300gf shall be applied to the tip of the terminal for 15 sec in any direction | |
負荷：在負荷的條件下以每分鐘25-30回的頻率進行100,000次的負荷測試; Aswitch shall be subjected to 100.000 cycles at a speed of 25-30 cycles for 1 min | |