- 您現在的位置：買賣IC網 > PDF目錄353101 > EL2270CSZT13 (Intersil Corporation) 70MHz/1mA Current Mode Feedback Amplifiers PDF資料下載
參數資料
| 型號： | EL2270CSZT13 |
| 廠商： | Intersil Corporation |
| 英文描述： | 70MHz/1mA Current Mode Feedback Amplifiers |
| 中文描述： | 70MHz/1mA電流模式反饋放大器 |
| 文件頁數： | 2/16頁 |
| 文件大?。?/td> | 330K |
| 代理商： | EL2270CSZT13 |
EL2170CEL2270CEL2470C
70 MHz1 mA Current Mode Feedback Amplifiers
Applications Information
Product Description
The EL2170CEL2270CEL2470C are current-
feedback operational amplifiers that offer a wide
b
3 dB bandwidth of 70 MHz and a low supply
current of 1 mA per amplifier All of these prod-
ucts also feature high output current drive The
EL2170C can output 100 mA while the EL2270C
and the EL2470C can output 55 mA per amplifi-
er The EL2170CEL2270CEL2470C work with
supply voltages ranging from a single 3V to
g
6V and they are also capable of swinging to
within 1V of either supply on the input and the
output Because of their current-feedback topolo-
gy
the EL2170CEL2270CEL2470C do not
have the normal gain-bandwidth product associ-
ated with voltage-feedback operational amplifi-
ers This allows their b3 dB bandwidth to re-
main relatively constant as closed-loop gain is in-
creased This combination of high bandwidth and
low power together with aggressive pricing make
the
EL2170CEL2270CEL2470C
the
ideal
choice for many low-powerhigh-bandwidth ap-
plications such as portable computing HDSL
and video processing
For applications where board space is extremely
critical the EL2170C is available in the tiny 5-
Lead SOT23 package which has a footprint 28%
the size of an 8-Lead SOIC
The EL2170C
EL2270CEL2470C are each also available in in-
dustry standard pinouts in PDIP and SOIC pack-
ages
For Single and Dual applications with disable
consider
the
EL2176C
(8-Pin
Single)
and
EL2276C (14-Pin Dual) If higher speed is re-
quired refer to the EL2180CEL2186C family
which provides Singles
Duals
Triples
and
Quads with 250 MHz of bandwidth while con-
suming 3 mA of supply current per amplifier
Power Supply Bypassing and Printed
Circuit Board Layout
As with any high-frequency device good printed
circuit board layout is necessary for optimum
performance Ground plane construction is high-
ly recommended Lead lengths should be as short
as possible The power supply pins must be well
bypassed to reduce the risk of oscillation The
combination of a 47
mF tantalum capacitor in
parallel with a 01
mF capacitor has been shown
to work well when placed at each supply pin
For good AC performance parasitic capacitance
should be kept to a minimum especially at the
inverting input (see the Capacitance at the In-
verting Input section) Ground plane construc-
tion should be used but it should be removed
from the area near the inverting input to mini-
mize any stray capacitance at that node Carbon
or Metal-Film resistors are acceptable with the
Metal-Film resistors giving slightly less peaking
and bandwidth because of their additional series
inductance Use of sockets particularly for the
SO package should be avoided if possible Sock-
ets add parasitic inductance and capacitance
which will result in some additional peaking and
overshoot
Capacitance at the Inverting Input
Any manufacturer’s high-speed voltage- or cur-
rent-feedback amplifier can be affected by stray
capacitance at the inverting input For inverting
gains this parasitic capacitance has little effect
because the inverting input is a virtual ground
but for non-inverting gains this capacitance (in
conjunction with the feedback and gain resistors)
creates a pole in the feedback path of the amplifi-
er This pole if low enough in frequency has the
same destabilizing effect as a zero in the forward
open-loop response The use of large value feed-
back and gain resistors further exacerbates the
problem by further lowering the pole frequency
10
相關PDF資料 |
PDF描述 |
|---|---|
| EL2386CSZT13 | 250MHz Triple Current Feedback Amplifier with Disable |
| EL5227CR-T13 | CSN Series closed loop current sensor, measures ac, dc or impulse current, 100 A nominal, ± 150 amp range, offset pin, 2000 turn |
| EL5227CR-T7 | 2.5MHz 4, 8, 10 & 12 Channel Rail-to-Rail Buffers |
| EL5197CW-T7 | Single 200MHz Fixed Gain Amplifier with Enable |
| EL5227CLZ-T7 | 2.5MHz 4, 8, 10 & 12 Channel Rail-to-Rail Buffers |
相關代理商/技術參數 |
參數描述 |
|---|---|
| EL2270CSZ-T7 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:70MHz/1mA Current Mode Feedback Amplifiers |
| EL2276 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:70MHz/1mA Current Mode Feedback Amp w/Disable |
| EL2276C | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Dual 70 MHz/1 mA Current Mode Feedback Amplifier with Disable |
| EL2276CN | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:70MHz/1mA Current Mode Feedback Amp W/Disable |
| EL2276CS | 功能描述:IC OP AMP CMF DUAL 5V 14-SOIC RoHS:否 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:通用 電路數:2 輸出類型:滿擺幅 轉換速率:1.8 V/µs 增益帶寬積:6.5MHz -3db帶寬:4.5MHz 電流 - 輸入偏壓:5nA 電壓 - 輸入偏移:100µV 電流 - 電源:65µA 電流 - 輸出 / 通道:35mA 電壓 - 電源，單路/雙路(±):1.8 V ~ 5.25 V，±0.9 V ~ 2.625 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP，10-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:10-MSOP 包裝:管件 |
發布緊急采購，3分鐘左右您將得到回復。