參數資料
型號: EP7211
廠商: Cirrus Logic, Inc.
英文描述: HIGH-PERFORMANCE ULTRA-LOW-POWER SYSTEM-ON-CHIP WITH LCD CONTROLLER
中文描述: 高性能超低功耗系統與LCD控制器芯片
文件頁數: 104/166頁
文件大小: 2623K
代理商: EP7211
EP7211
High-Performance Ultra-Low-Power System-on-Chip with LCD Controller
104
Register Descriptions
DS352PP3
JUL 2001
5.7
PMPCON Pump Control Register
ADDRESS: 0x8000.0400
The Pulse Width Modulator (PWM) pump control register is a 16-bit read/write register which sets
and controls the variable mark space ratio drives for the two PWMs. All bits in this register are
cleared by a system reset. (The top four bits are unused. They should be written as zeroes, and will
read as undefined).
The state of the output drive pins is latched during power on reset, this latched value is used to
determine the polarity of the drive output. The sense of the PWM control lines is summarized in
Table 5-9
.
External input pins that would normally be connected to the output from comparators monitoring the
PWM output are also used to enable these clocks. These are the
FB[0:1]
pins. They are read upon
power-up. When
FB[0]
is high, the PWM is disabled. The same applies to
FB[1]
.
NOTE:
To maximize power savings, the drive ratio fields should be used to disable the PWMs, instead of the
FB
pins. The clocks that source the PWMs are disable when the drive ratio fields are zeroed.
11:8
7:4
3:0
Drive 1 pump ratio
Drive 0 from AC source ratio
Drive 0 from battery ratio
Bit
Description
0:3
Drive 0 from battery
: This 4-bit field controls the
on
time for the drive0 PWM pump while the system is
powered from batteries. Setting these bits to 0 disables this pump, setting these bits to 1 allows the pump
to be driven in a 1:16 duty ratio, 2 in a 2:16 duty ratio etc. up to a 15:16 duty ratio. An 8:16 duty ratio results
in a square wave of 96 kHz when operating with an
18.432 MHz master clock, or 101.6 kHz when operating from the 13 MHz source.
4:7
Drive 0 from AC
: This 4-bit field controls the
on
time for the drive0 DC to DC pump while the system is
powered from a non-battery type power source. Setting these bits to 0 disables this pump, setting these
bits to 1 allows the pump to be driven in a 1:16 duty ratio, 2 in a 2:16 duty ratio, etc. up to a 15:16 duty
ratio. An 8:16 duty ratio results in a square wave of 96 kHz when operating with an 18.432 MHz master
clock, or 101.6 kHz when operating from the 13 MHz source.
NOTE:
The EP7211 monitors the power supply input pins (i.e.,
BATOK
and
NEXTPWR
) to determine
which of the above fields to use.
8:11
Drive 1 pump ratio
: This 4-bit field controls the
on
time for the drive1 PWM pump. Setting these bits to 0
disables this pump, setting these bits to 1 allows the pump to be driven in a 1:16 duty ratio, 2 in a 2:16 duty
ratio, etc. up to a 15:16 duty ratio. An 8:16 duty ratio results in a square wave of 96 kHz when operating
with an 18.432 MHz master clock, or 101.6 kHz when operating from the 13 MHz source.
Table 5-9. Sense of PWM control lines
Initial State of Driven During
Power on Reset
Sense of Driven
Polarity of Bias
Voltage
Low
Active high
+ve
High
Active low
-ve
相關PDF資料
PDF描述
EP7211-CP-A HIGH-PERFORMANCE ULTRA-LOW-POWER SYSTEM-ON-CHIP WITH LCD CONTROLLER
EP7211-CV-A HIGH-PERFORMANCE ULTRA-LOW-POWER SYSTEM-ON-CHIP WITH LCD CONTROLLER
EP7212 HIGH-PERFORMANCE, LOW-POWER SYSTEM-ON-CHIP WITH LCD CONTROLLER AND DIGITAL AUDIO INTERFACE(DAI)
EP7212-CB-A HIGH-PERFORMANCE, LOW-POWER SYSTEM-ON-CHIP WITH LCD CONTROLLER AND DIGITAL AUDIO INTERFACE(DAI)
EP7212-CV-A HIGH-PERFORMANCE, LOW-POWER SYSTEM-ON-CHIP WITH LCD CONTROLLER AND DIGITAL AUDIO INTERFACE(DAI)
相關代理商/技術參數
參數描述
EP7211(208LQFP) 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Logic IC
EP7211(256PBGA) 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Logic IC
EP7211-CB-D 制造商:Rochester Electronics LLC 功能描述:- Bulk
EP7211-CP-A 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:HIGH-PERFORMANCE ULTRA-LOW-POWER SYSTEM-ON-CHIP WITH LCD CONTROLLER
EP7211-CV-A 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:HIGH-PERFORMANCE ULTRA-LOW-POWER SYSTEM-ON-CHIP WITH LCD CONTROLLER