- 您現在的位置：買賣IC網 > PDF目錄370449 > HCMS-2922 High Performance CMOS 5 x 7 Alphanumeric Displays(高性能CMOS 5 x 7 文字?jǐn)?shù)字顯示器) PDF資料下載
參數資料
| 型號： | HCMS-2922 |
| 英文描述： | High Performance CMOS 5 x 7 Alphanumeric Displays(高性能CMOS 5 x 7 文字?jǐn)?shù)字顯示器) |
| 中文描述： | 高性能CMOS 5 × 7字母數字顯示器（高性能的CMOS 5 × 7文字?jǐn)?shù)字顯示器） |
| 文件頁數： | 11/16頁 |
| 文件大?。?/td> | 304K |
| 代理商： | HCMS-2922 |
11
right-most characters. The Dot
Registers are connected in series
to form a 320-bit dot shift
register. The location of pixel 0
has not changed. However, Dot
Shift Register bit 0 of IC2
becomes bit 160 of the 320-bit
dot shift register.
The Control Registers of the two
ICs are independent of each
other. This means that to adjust
the display brightness the same
control word must be entered into
both ICs, unless the Control
Registers are set to simultaneous
mode.
Longer character string systems
can be built by cascading multiple
displays together. This is
accomplished by creating a five
line bus. This bus consists of CE,
RS, BL, Reset, and CLK. The
display pins are connected to the
corresponding bus line. Thus, all
CE pins are connected to the CE
bus line. Similarly, bus lines for
RS, BL, Reset, and CLK are
created. Then D
IN
is connected to
the right-most display. D
OUT
from
this display is connected to the
next display. The left-most display
receives its D
IN
from the D
OUT
of
the display to its right. D
OUT
from
the left-most display is not used.
Each display may be set to use its
internal oscillator, or the displays
may be synchronized by setting
up one display as the master and
the others as slaves. The slaves
are set to receive their oscillator
input from the master’s oscillator
output.
Sleep mode (Control Word 0, bit
D
6
= Low) turns off the Internal
Display Oscillator and the LED
pixel drivers. This mode is used
when the IC needs to be powered
up, but does not need to be
active. Current draw in sleep
mode is nearly zero. Data in the
Dot Register and Control Words
are retained during sleep mode.
Control Word 1
Loading the Control Register with
D
7
= logic high selects Control
Word 1. This Control Word
performs two functions: serial/
simultaneous data out mode and
external oscillator prescale select
(see Table 2).
Serial/Simultaneous Data
Output D
0
Bit D
0
of control word 1 is used to
switch the mode of D
OUT
between
serial and simultaneous data entry
during Control Register writes.
The default mode (logic low) is
the serial D
OUT
mode. In serial
mode, D
OUT
is connected to the
last bit (D
7
) of the Control Shift
Register.
Storing a logic high to bit D
0
changes D
OUT
to simultaneous
mode which affects the Control
Register only. In simultaneous
mode, D
OUT
is logically connected
to D
IN
. This arrangement allows
multiple ICs to have their Control
Registers written to simul-
taneously. For example, for N ICs
in the serial mode, N * 8 clock
pulses are needed to load the
same data in all Control Registers.
In the simultaneous mode, N ICs
only need 8 clock pulses to load
the same data in all Control
Registers. The propagation delay
from the first IC to the last is
N * t
DOUTP
.
External Oscillator
Prescaler Bit D
1
Bit D
1
of Control Word 1 is used
to scale the frequency of an
external Display Oscillator. When
this bit is logic low, the external
Display Oscillator directly sets the
internal display clock rate. When
this bit is a logic high, the
external oscillator is divided by 8.
This scaled frequency then sets
the internal display clock rate. It
takes 512 cycles of the display
clock (or 8 x 512 = 4096 cycles
of an external clock with the
divide by 8 prescaler) to com-
pletely refresh the display once.
Using the prescaler bit allows the
designer to use a higher external
oscillator frequency without extra
circuitry.
This bit has no affect on the
internal Display Oscillator
Frequency.
Bits D
2
-D
6
These bits must always be pro-
grammed to logic low.
Cascaded ICs
Figure 3 shows how two ICs are
connected within an HCMS-29XX
display. The first IC controls the
four left-most characters and the
second IC controls the four
相關PDF資料 |
PDF描述 |
|---|---|
| HCMS-2901 | High Performance CMOS 5 x 7 Alphanumeric Displays(高性能CMOS 5 x 7 文字?jǐn)?shù)字顯示器) |
| HCMS-2902 | High Performance CMOS 5 x 7 Alphanumeric Displays(高性能CMOS 5 x 7 文字?jǐn)?shù)字顯示器) |
| HCMS-2903 | High Performance CMOS 5 x 7 Alphanumeric Displays(高性能CMOS 5 x 7 文字?jǐn)?shù)字顯示器) |
| HCMS-2911 | Bipolar Transistor; Collector Emitter Voltage, Vceo:400V; Transistor Polarity:NPN; Power Dissipation:100W; DC Current Gain Min (hfe):8; Collector Current:15A; Package/Case:TO-3; Terminal Type:5; Current Rating:15A |
| HCMS-2912 | Bipolar Transistor; Transistor Polarity:N Channel; Power Dissipation:10W; DC Current Gain Min (hfe):5; Collector Current:1A; Package/Case:TO-3; DC Current Gain Max (hfe):150; Power (Ptot):10W; Current Rating:20A; Voltage Rating:500V |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HCMS-2923 | 功能描述:LED 顯示器和配件 Green 574nm 2x8 Alphanumeric RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
| HCMS-2924 | 功能描述:LED 顯示器和配件 Orange 602nm 2x8 Alphanumeric RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
| HCMS-2925 | 功能描述:LED 顯示器和配件 Red 637nm 2x8 Alphanumeric RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
| HCMS-2961 | 功能描述:LED 顯示器和配件 Yelow 585nm 1x4 Alphanumeric RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
| HCMS-2962 | 功能描述:LED 顯示器和配件 Red 626nm 1x4 Alphanumeric RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。