參數資料
型號: HFA3861IV96
廠商: INTERSIL CORP
元件分類: 無繩電話/電話
英文描述: Direct Sequence Spread Spectrum Baseband Processor
中文描述: TELECOM, CELLULAR, BASEBAND CIRCUIT, PQFP64
封裝: 10 X 10 MM, PLASTIC, TQFP-64
文件頁數: 27/35頁
文件大?。?/td> 218K
代理商: HFA3861IV96
27
CONFIGURATION REGISTER 19 ADDRESS (26h) R/W AGC CONTROL 6
Bits 7:5
R/W but not currently used internally, should be set to zero to ensure compatibility with future revisions.
Bits 4:0
AGC Lock-in level (0-7.5 range)
CONFIGURATION REGISTER 20 ADDRESS (28h) R/W AGC CONTROL 7
Bits 7:5
R/W, But Not Used Internally
Bit 4:0
AGC Lock Window (0-15.5 range)
CONFIGURATION REGISTER 21 ADDRESS (2Ah) R/W AGC CONTROL 8
Bits 7,6
R/W but not currently used internally, should be set to zero to ensure compatibility with future revisions.
Bits 5:0
AGC Threshold (0-31.5 range)
CONFIGURATION REGISTER 22 ADDRESS (2Ch) R/W AGC CONTROL 9
Bits 7,6
R/W but not currently used internally, should be set to zero to ensure compatibility with future revisions.
Bits 5
AGC Look up table read control bit
1 = Read
0 = write
Bits 4:0
AGC lookup table address (32 address bits)
CONFIGURATION REGISTER 23 ADDRESS (2Eh) R/W AGC CONTROL 10
Bits 7
R/W but not currently used internally, should be set to zero to ensure compatibility with future revisions.
Bits 6:0
AGC look up table data unsigned
CONFIGURATION REGISTER 24 ADDRESS (30h) R/W AGC CONTROL 11
Bits 7
R/W but not currently used internally, should be set to zero to ensure compatibility with future revisions.
Bit 6:0
AGC loop gain (0.xxxx - 1.0000 range)
CONFIGURATION REGISTER 25 ADDRESS (32h) R/W AGC CONTROL 12
Bits 7
AGC RX_RF, This input drives the RF RF control if AGC override Enable is set to 1
Bits 6:0
AGC RX_IF, This reg is input to RF IF DAC if AGC override Enable is set to 1
CONFIGURATION REGISTER 26 ADDRESS (34h) R/W AGC TEST MODES
Bits 7:4
R/W but not currently used internally, should be set to zero to ensure compatibility with future revisions.
Bit 3
AGC run on freeze- AGC keeps running after acquisition is complete, only signal is updated, no changes to IF or RF gain occur
0 = normal
1 = enabled
Bit 2
AGC override Enable, if set, CR25 controls receiver gain in both RF and IF
0 = normal
1 = enabled
Bit 1
AGC random I/Q allows random data on AGC 6 bit I/Q inputs if PN is enabled
0 = normal
1 = enabled
Bit 0
AGC test math- always accumulates in gain adjust, always outputs mean power from log table.
0 = normal
1 = enabled
HFA3861
相關PDF資料
PDF描述
HFA3925 2.4GHz - 2.5GHz 250mW Power Amplifier(2.4GHz - 2.5GHz 250mW 功率放大器)
HFA3926 2.0GHz - 2.7GHz 250mW Power Amplifier(2.0GHz - 2.7GHz 250mW 功率放大器)
HFA3926IA 2.0GHz - 2.7GHz 250mW Power Amplifier
HFA3926IA96 2.0GHz - 2.7GHz 250mW Power Amplifier
HFA5251 800MHz Monolithic Pin Driver
相關代理商/技術參數
參數描述
HFA3863 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Direct Sequence Spread Spectrum Baseband Processor
HFA3863IN 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Direct Sequence Spread Spectrum Baseband Processor
HFA3863IN96 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Direct Sequence Spread Spectrum Baseband Processor
HFA3925 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:null2.4GHz - 2.5GHz 250mW Power Amplifier
HFA3925IA 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Harris Corporation 功能描述: