
Prepare by Telecom Group 1 Rev. D 3/29/2002
Supertex, Inc. 1235 Bordeaux Drive, Sunnyvale, CA 94089 TEL: (408) 744-0100 FAX: (408) 222-4895 www.supertex.com
HV9904
Preliminary Engineering Specification
HV9904 Multi Converter Controller
Features
Eliminates High Voltage Input Electrolytic Capacitor
Smallest and Most Reliable Off-Line Solution
Constant Current or Constant Voltage Mode Control
Can be Operated Directly from Rectified AC Mains
10V to 400V Input Range Internal Regulator
1.5mA Operating Supply Current
PLL Based Loop Control with Soft Start
On-Time Varies Inversely with Input Voltage
Frequency Varies with Load
2.5V Differential Sense
Recommended for <10W Applications
Applications
Universal Input Voltage LED driver
Constant Current Source
Battery Charger
Ordering Information
Package Options
8 Pin Plastic DIP
8 Pin SOIC
HV9904P
HV9904LG
Dice
HV9904X
General Description
The Supertex HV9904 is a second order PWM controller designed
to provide a constant average current output or a constant average
voltage output from an input of 10V to 400V DC or directly from
rectified AC mains up to 280V. The second order topology is
capable of extremely high dynamic control range, allowing
operation directly from rectified AC mains without the need for
bulky and expensive high voltage input electrolytic capacitor.
The PWM control utilizes feed forward circuitry to compensate for
large variations in input voltage (i.e. rectified AC) and a novel
integrator lock loop PLL scheme to regulate a differentially sensed
feedback node where the signal may be discontinuous. This
feedback node could be a current sense resistor or divider from
regulated output voltage. For a constant load the switching
frequency will be nearly constant with a dither of a few kHz helping
to meet FCC conducted emissions requirements.
A high input voltage linear regulator provides a stable Vdd supply
for the internal circuitry and gate drive to the external MOSFET.
Under voltage lockout provides a power on reset and protection for
the MOSFET
Typical Application Circuit
PS
GATE
NS
+Vin
Vdd
AGND
HV9904
1mH
220uH
0.1uF
10VDC to 400VDC
or
VAC to 265V
1 to 8
LEDs
250
VN2460N8
or
IRFBC30AS
1uF
0.01uF
10mA
PGND
0.1uF
400V
C1
D1
D2
D4
D3
C2
L1
L2
C3
C4
MURS120T3
D6
D7
R1
M1
U1
1N4007
D5
MURS120T3
MURS120T3
Universal Input Constant Average Currrent LED Lamp Power Supply