參數資料
型號: IBMN325404CT3
廠商: IBM Microeletronics
英文描述: 256Mb(4Mbit x 16 I/O x 4 Bank) Synchronous DRAM(256M位(4M位 x 16 I/O x 4 組)同步動態RAM)
中文描述: 256Mb的(的4Mb × 16的I / O × 4行)同步DRAM(256M位(4分位× 16的I / O × 4組)同步動態RAM)的
文件頁數: 28/66頁
文件大?。?/td> 1699K
代理商: IBMN325404CT3
IBMN325164CT3
IBMN325404CT3
256Mb Synchronous DRAM - Die Revision B
IBMN325804CT3
Preliminary
IBM Corporation. All rights reserved.
Use is further subject to the provisions at the end of this document.
Page 28 of 66
06K0608.F39375A
10/00
Clock Suspend Mode
During normal access mode, CKE is held high, enabling the clock. When CKE is registered low while at least
one of the banks is active, Clock Suspend Mode is entered. The Clock Suspend mode deactivates the inter-
nal clock and suspends or “freezes” any clocked operation that was currently being executed. There is a one-
clock delay between the registration of CKE low and the time at which the SDRAM’s operation suspends.
While in Clock Suspend mode, the SDRAM ignores any new commands that are issued. The Clock Suspend
mode is exited by bringing CKE high. There is a one clock cycle delay from when CKE returns high to when
Clock Suspend mode is exited.
When the operation of the SDRAM is suspended during the execution of a Burst Read operation, the last
valid data output onto the DQ pins will be actively held valid until Clock Suspend mode is exited.
If Clock Suspend mode is initiated during a burst write operation, the input data is masked and is ignored until
the Clock Suspend mode is exited.
Clock Suspend during a Read Cycle
Clock Suspend during a Write Cycle
CK
T0
T2
T1
T3
T4
T5
T6
T7
T8
COMMAND
NOP
READ A
NOP
NOP
NOP
NOP
CKE
DQs
DOUT A
0
DOUT A
2
DOUT A
1
: “H” or “L”
A one clock delay before
suspend operation starts
A one clock delay to exit
the Suspend command
DOUT element at the DQs when the
suspend operation starts is held valid
(Burst Length = 4, CAS Latency = 2)
CK
T0
T2
T1
T3
T4
T5
T6
T7
T8
COMMAND
NOP
WRITE A
NOP
NOP
NOP
NOP
CKE
DQs
DIN A
2
DIN A
3
: “H” or “L”
A one clock delay before
suspend operation starts
A one clock delay to exit
the Suspend command
DIN is masked during the Clock Suspend Period
DIN A
1
DIN A
0
(Burst Length = 4, CAS Latency = 2)
相關PDF資料
PDF描述
IBMN325804CT3 256Mb(8Mbit x 8 I/O x 4 Bank) Synchronous DRAM(256M位(8M位 x 8 I/O x 4 組)同步動態RAM)
IBMN325164CT3 256Mb(16Mbit x 4 I/O x 4 Bank) Synchronous DRAM(256M位(16M位 x 4 I/O x 4 組)同步動態RAM)
IBMN612404GT3B 128Mb Double Data Rate Synchronous DRAM(128M位高速CMOS同步動態RAM(采用雙數據速率結構))
IBMN612804GT3B 128Mb Double Data Rate Synchronous DRAM(128M位高速CMOS同步動態RAM(采用雙數據速率結構))
IBMN625404GT3B 256Mb Double Data Rate Synchronous DRAM(256M位雙數據速率同步動態RAM)
相關代理商/技術參數
參數描述
IBMN364164CT3C360 制造商:IBM 功能描述:*
IBMPPC403GAJC33C1 制造商:IBM 功能描述:
IBMPPC750CLGEQ4023 制造商:IBM 功能描述:MPU 750CL RISC 32BIT 90NM 400MHZ 1.15V/1.8V 278FCBGA - Trays
IBMPPC750CLGEQ5023 制造商:IBM Microelectronics 功能描述:MPU 750CL RISC 32BIT 90NM 500MHZ 1.15V/1.8V 278FCBGA - Trays
IBMPPC750CLGEQA033 制造商:IBM 功能描述:MPU 750CL RISC 32BIT 90NM 1GHZ 1.15V/1.8V 278FCBGA - Trays 制造商:IBM 功能描述:IBMIBMPPC750CLGEQA033 CPU PPC 750CL 1GHZ