- 您現在的位置：買賣IC網 > PDF目錄374322 > KC75118C (SAMSUNG SEMICONDUCTOR CO. LTD.) 1/5 INCH CCD IMAGE SENSOR FOR NTSC CAMERA PDF資料下載
參數資料
| 型號： | KC75118C |
| 廠商： | SAMSUNG SEMICONDUCTOR CO. LTD. |
| 英文描述： | 1/5 INCH CCD IMAGE SENSOR FOR NTSC CAMERA |
| 中文描述： | 1 / 5英寸CCD圖像傳感器的NTSC制式攝像機 |
| 文件頁數： | 20/20頁 |
| 文件大?。?/td> | 255K |
| 代理商： | KC75118C |
1/5 INCH CCD IMAGE SENSOR FOR NTSC CAMERA
KC75118C
20
HANDLING INSTRUCTIONS
CCD image sensors can be easily damaged by static discharge. Before handling, be sure to take the following
protective measures.
Static Charge Prevention
— Use non chargeable gloves, clothes or material. Also use conductive shoes.
— When handling directly, use an earth band.
— Install a conductive mat on the floor or working table to prevent generation of static electricity.
— Ionized air is recommended for discharging when handling CCD image sensor.
— For the shipment of mounted substrates, use boxes treated for the prevention of static charges.
Soldering
— Make sure the package temperature does not exceed 80
°
C.
— Solder dipping in a mounting furnace causes damage to the glass and other defects. Use a grounded 30W
soldering iron and solder each pin in less than 2 seconds. For repairs and and remount, cool sufficiently.
— To dismount an imaging device, do not use a solder suction equipment. When using an electronic
disoldering tool, use a thermal controller of the zero cross on/off type and connect to ground
Dust and Dirt Protection
— Operate in the clean environments (around class 1000 will be appropriate).
— Do not either touch glass plates by hand or have object come in contact with glass surface. Should dirt
stick to a glass surface blow it off with an air blow (for dirt stuck through static electricity ionized air is
recommended).
— Clean with a cotton bud and ethyl alcohol if the glass surface is grease stained. Be caerful not to scratch
the glass.
— Keep in case to protect from dust and dirt. To prevent dew condensation, preheat or precool when moving
to a room with great temperature differences.
— When a protective tape is applied before shipping, just before use remove the tape applied electrostatic
protection. Do not reuse the tape.
Do not expose to strong light (sun rays) for long period, color filter are discolored.
Exposure to high temperature or humidity will affect the characteristics. accordingly avoid storage or
usage in such conditions.
CCD image sensors are precise optical equipment that should not be subject to mechanical shocks.
相關PDF資料 |
PDF描述 |
|---|---|
| KC7783 | PIR Sensor Module |
| KC7786 | PIR Sensor Module |
| KCA322EA | AM Tuner For Car Audio(汽車音響AM調諧器) |
| KCA322EH | AM Tuner For Car Audio(汽車音響AM調諧器) |
| KCA322UA | AM Tuner For Car Audio(汽車音響AM調諧器) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| KC7783 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:PIR Sensor Module |
| KC7783R | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:PIR Module Low Cost version |
| KC7786 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:PIR Sensor Module |
| KC7789 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:PIR SENSOR WITH BUILT-IN AMPLIFIER |
| KC-79-07 | 制造商:Kings Electronics 功能描述:RF/COAXIAL BNC JACK STRAIGHT 50OHM 制造商:Kings Electronics 功能描述:RF/COAXIAL, BNC JACK, STRAIGHT, 50 OHM; Series:-; Connector Type:BNC Coaxial; Body Style:Straight Jack; Coaxial Termination:Through Hole Vertical; Impedance:50ohm; Contact Material:Beryllium Copper; Contact Plating:Silver ;RoHS Compliant: Yes 制造商:Kings Electronics 功能描述:RF/COAXIAL, BNC JACK, STRAIGHT, 50 OHM; Series:-; Connector Type:BNC Coaxial; Body Style:Straight Jack; Coaxial Termination:Through Hole Vertical; Impedance:50ohm; Coaxial Cable Types:(Not Available); Contact Plating:Silver ;RoHS Compliant: Yes |
發布緊急采購，3分鐘左右您將得到回復。