
61
123456789012345678901234567890121234567
All specifications are typical at nominal line and full load at 25°C unless
otherwise noted and are subject to change without notice.
6 Watts
Single/Dual Outputs
High performance design
Ultra-low noise
Continuous short circuit
protection
TheCM,PandPASeriesboast
over a decade of reliable, field
proven service and are the
recognized industry standard for high
performance AC/DC power supplies.
The PA Series is equipped with industry
standard 2.2” pin spacing while the P
Series is 2.0”.
The CM Series are high performance
chassis mount versions employing a
top-mounted, five terminal barrier strip
for power entry and exit. These units
are ideal for systems that are best
implemented with “hard wire” power
cabling techniques. Features include
MTBF’s of greater than 150,000 hours,
lower case temperature rise (to 18°C
cooler) and the high in-circuit perfor-
mance. This higher efficiency results in
lower ambient temperatures and
greater system reliability. Dual output
tracking is standard.
CM, P, PA Series
INPUT
Voltage and Frequency
Standard
105 to 125 Vac - 50 to 440 Hz
Suffix I
200 to 252 Vac - 50 to 60 Hz
Suffix N
90 to 110 Vac - 50 to 60 Hz
Suffix K
200 to 252 Vac - 50 to 60 Hz
Suffix K2
105 to 125/210 to 250 Vac
OUTPUT
Voltage Tolerance
± 1%
Ripple and Noise (PARD)
1mV RMS
Short Circuit Protection
Current Limiting
Temperature Coefficient
0.02% / °C
GENERAL
I/O Isolation
1500 Vac
Suffix I
2500 Vac
ENVIRONMENTAL
Operating Temperature
-25°C to +71°C No Derating
Storage Temperature
-25°C to +85°C
Cooling
Free-air Convection