INTERFACE SPECIFICATION Seiko Epson EG9013F-NZ Page 1 of 1
INSIDE Technology A/S for 686LCD/GXm
Document no. D00341-0 Date: 2000-04-19 Rev.: 0
Display type: Seiko Epson EG9013F-NZ
Inverter no.:
Cable no.: 727310
System: 686LCD/GXm
Display driver: 640x480, STN Mono, Epson, EG9013F-NZ, 3.3 Volt
Status: Verified
FAS-CO Board
Connector P1
J
PLCD
Connector
Remarks
Term. # Function Pin Function
1 DIN 11 FLM Scan start-up signal
2 LP 10 LP Input data latch signal
3 XSCL 13 SHFCLK Data input clock signal
4 VDD 1-2 LCDVCC Power supply for logic and LCD (+5V)
5 VSS 12 Gnd Ground
6 - - -
7 VSS 14 Gnd Ground
8 D0 15 P0
9 D1 16 P1
10 D2 18 P2
11 D3 19 P3 Display data signal (D0 – D7)
12 D4 21 P4
13 D5 22 P5
14 D6 24 P6
15 D7 25 P7
16 ENAVEE 3 Enable LC driving Voltage
17 ENABL 8 ENBKL Backlight Enable
18 - - -
19 GND1 50 Gnd Ground for LC driving and Bkl. inv.
20 + 12 Volt 99-100 PWR Supply for LC driving and Bkl. Inv.