
Rev 0.2, 3-Mar-11
www.power-one.com
Page 7 of 14
SQL48T20033 DC-DC Converter
36-75 VDC Input; 3.3 VDC @ 20A Output
Preliminary Data Sheet
Startup Information (using negative ON/OFF)
Scenario #1: Initial Startup From Bulk Supply
ON/OFF function enabled, converter started via application
of VIN. See Fig. E.
Time
Comments
t0
ON/OFF pin is ON; system front-end power is
toggled on, VIN to converter begins to rise.
t1
VIN crosses undervoltage Lockout protection
circuit threshold; converter enabled.
t2
Converter begins to respond to turn-on
command (converter turn-on delay).
t3
Converter VOUT reaches 100% of nominal value.
For this example, the total converter startup time (t3- t1) is
typically 4 ms.
Scenario #2: Initial Startup Using ON/OFF Pin
With VIN previously powered, converter started via
ON/OFF pin. See Fig. F.
Time
Comments
t0
VINPUT at nominal value.
t1
Arbitrary time when ON/OFF pin is enabled
(converter enabled).
t2
End of converter turn-on delay.
t3
Converter VOUT reaches 100% of nominal value.
For this example, the total converter startup time (t3- t1) is
typically 5 ms.
Scenario #3: Turn-off and Restart Using ON/OFF Pin
With VIN previously powered, converter is disabled and
then enabled via ON/OFF pin. See Fig. G.
Time
Comments
t0
VIN and VOUT are at nominal values; ON/OFF pin
ON.
t1
ON/OFF pin arbitrarily disabled; converter
output falls to zero; turn-on inhibit delay period
(200 ms typical) is initiated, and ON/OFF pin
action is internally inhibited.
t2
ON/OFF pin is externally re-enabled.
If (t2- t1) ≤ 200 ms, external action of
ON/OFF pin is locked out by startup inhibit
timer.
If (t2- t1) > 200 ms, ON/OFF pin action is
internally enabled.
t3
Turn-on inhibit delay period ends. If ON/OFF pin
is ON, converter begins turn-on; if off, converter
awaits ON/OFF pin ON signal; see Figure F.
t4
End of converter turn-on delay.
t5
Converter VOUT reaches 100% of nominal value.
For the condition, (t2- t1) ≤ 200 ms, the total converter
startup time (t5- t1) is typically 205 ms. For (t2- t1) > 200 ms,
startup will be typically 5 ms after release of ON/OFF pin.
Fig. E: Startup scenario #1.
Fig. F: Startup scenario #2.
Fig. G: Startup scenario #3.
ON/OFF
STATE
OFF
ON
VOUT
t0
t2
t1
t5
VIN
t
t4
t3
200 ms
ON/OFF
STATE
VOUT
t0
t1 t2
t3
ON
OFF
VIN
t
VIN
ON/OFF
STATE
VOUT
t
t0
t1 t2
t3
ON
OFF