![](http://datasheet.mmic.net.cn/60000/073222_datasheet_2175910/073222_4.png)
2
Catalog E 074546
05/05
Edition 1
www.erni.com
Number of contacts 10, 14, 16, 20, 26, 34, 40, 50, 60
and 64.
Plug connectors with and without interlocking latches
Simultaneous contacting of all conductors in one process
IDC displacement connections
Suitable for all commonly available ribbon technology
for female cables with pitch of 1.27mm.
With the strain release clamps supplied in the product
package, an outgoing cable can be fed at an angle of
90° and 180° to the plug connection.
Center Coding
2 form factors: Standard and Low Profile
Main features
ERNI LPV connectors according to IEC 603-13 (DIN 41651)
are well known to our customers worldwide. To connect PC
motherboards and HDDs (hard disk drive) high volume of con-
nectors were used over the last 10 years. Due to space saving
issues low profile versions, used especially on embedded
boards or test computers with small form factor like PC 104 -,
PC 104 plus-Standard are becoming more and more important.
The international standard describes a solder male header
which is used on pcbs. Other terminations have established
themselves as well. The female version is intended to connect
a flat cable via IDC technology. IDC technology has been
tested and is very reliable , due to gastight and corrosion
resistant contacts, which guarantee a life long low resistance.
An integrated coding key in the middle of the connector
housing avoids mismating and damaging contacts.
Optional locking latches hold female connectors back in their
mating position during vibration or shock loads. Latches help
eject the female connector and protect it against damaging
while disconnecting.
Male connectors are available for pressfit, solder and THR
processes.
General
According to IEC 603-13 and DIN 41 651
Board to Cable Connectors Series LPV