- 您現在的位置：買賣IC網 > PDF目錄24704 > 08053A472J-MR CAP. 4.7NF MINIREEL 500PCS PDF資料下載
參數資料
| 型號： | 08053A472J-MR |
| 英文描述： | CAP. 4.7NF MINIREEL 500PCS |
| 中文描述： | 第。 4.7NF MINIREEL 500件 |
| 文件頁數： | 10/12頁 |
| 文件大?。?/td> | 344K |
| 代理商： | 08053A472J-MR |
42
WAVE SOLDERING
Component Spacing
For wave soldering components, must be spaced sufficiently
far apart to avoid bridging or shadowing (inability of solder
to penetrate properly into small spaces). This is less impor-
tant for reflow soldering but sufficient space must be
allowed to enable rework should it be required.
Preheat & Soldering
The rate of preheat should not exceed 4°C/second to
prevent thermal shock. A better maximum figure is about
2°C/second.
For capacitors size 1206 and below, with a maximum
thickness of 1.25mm, it is generally permissible to allow a
temperature differential from preheat to soldering of 150°C.
In all other cases this differential should not exceed 100°C.
For further specific application or process advice, please
consult AVX.
Cleaning
Care should be taken to ensure that the capacitors are
thoroughly cleaned of flux residues especially the space
beneath the capacitor. Such residues may otherwise
become conductive and effectively offer a low resistance
bypass to the capacitor.
Ultrasonic cleaning is permissible, the recommended
conditions being 8 Watts/litre at 20-45 kHz, with a process
cycle of 2 minutes vapor rinse, 2 minutes immersion in the
ultrasonic solvent bath and finally 2 minutes vapor rinse.
Surface Mounting Guide
MLC Chip Capacitors
D1
D2
D3
D4
D5
Case Size
D1
D2
D3
D4
D5
0603
3.10 (0.12)
1.20 (0.05)
0.70 (0.03)
1.20 (0.05)
0.75 (0.03)
0805
4.00 (0.15)
1.50 (0.06)
1.00 (0.04)
1.50 (0.06)
1.25 (0.05)
1206
5.00 (0.19)
1.50 (0.06)
2.00 (0.09)
1.50 (0.06)
1.60 (0.06)
1210
5.00 (0.19)
1.50 (0.06)
2.00 (0.09)
1.50 (0.06)
2.50 (0.10)
Dimensions in millimeters (inches)
≥1mm (0.04)
≥1.5mm (0.06)
≥1mm (0.04)
相關PDF資料 |
PDF描述 |
|---|---|
| 08055A102J-MR | CAP. 1NF MINIREEL 500PCS |
| 08055A222J-MR | CAP. 2.2NF MINIREEL 500PCS |
| 934056256127 | 42 A, 55 V, 0.03 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220AB |
| 934056266118 | 42 A, 55 V, 0.03 ohm, N-CHANNEL, Si, POWER, MOSFET |
| 934056257127 | 42 A, 55 V, 0.028 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220AB |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 08053A472KAT2A | 功能描述:多層陶瓷電容器MLCC - SMD/SMT 25V 4700pF 10% RoHS:否 制造商:American Technical Ceramics (ATC) 電容:10 pF 容差:1 % 電壓額定值:250 V 溫度系數/代碼:C0G (NP0) 外殼代碼 - in:0505 外殼代碼 - mm:1414 工作溫度范圍:- 55 C to + 125 C 產品:Low ESR MLCCs 封裝:Reel |
| 08053A4R7CAT2A | 功能描述:多層陶瓷電容器MLCC - SMD/SMT 25V 4.7pF RoHS:否 制造商:American Technical Ceramics (ATC) 電容:10 pF 容差:1 % 電壓額定值:250 V 溫度系數/代碼:C0G (NP0) 外殼代碼 - in:0505 外殼代碼 - mm:1414 工作溫度范圍:- 55 C to + 125 C 產品:Low ESR MLCCs 封裝:Reel |
| 08053A4R7DAT2A | 功能描述:多層陶瓷電容器MLCC - SMD/SMT 25V 4.7pF RoHS:否 制造商:American Technical Ceramics (ATC) 電容:10 pF 容差:1 % 電壓額定值:250 V 溫度系數/代碼:C0G (NP0) 外殼代碼 - in:0505 外殼代碼 - mm:1414 工作溫度范圍:- 55 C to + 125 C 產品:Low ESR MLCCs 封裝:Reel |
| 08053A510KAT4A | 功能描述:多層陶瓷電容器MLCC - SMD/SMT 25V 5.1pF 10% RoHS:否 制造商:American Technical Ceramics (ATC) 電容:10 pF 容差:1 % 電壓額定值:250 V 溫度系數/代碼:C0G (NP0) 外殼代碼 - in:0505 外殼代碼 - mm:1414 工作溫度范圍:- 55 C to + 125 C 產品:Low ESR MLCCs 封裝:Reel |
| 08053A560FAT2A | 功能描述:多層陶瓷電容器MLCC - SMD/SMT 56PF 25V 1% RoHS:否 制造商:American Technical Ceramics (ATC) 電容:10 pF 容差:1 % 電壓額定值:250 V 溫度系數/代碼:C0G (NP0) 外殼代碼 - in:0505 外殼代碼 - mm:1414 工作溫度范圍:- 55 C to + 125 C 產品:Low ESR MLCCs 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。