參數資料
型號： 101-0399
廠商： Rabbit Semiconductor
文件頁數： 26/80頁
文件大小： 0K
描述： KIT DEV RABBIT RCM2000 INT'L
標準包裝： 1
系列： RabbitCore 2000
類型： MPU 模塊
適用于相關產品： RCM2000，RCM2010，RCM2020
所含物品： RabbitCore 模塊、開發板、交流適配器、纜線和 Dynamic C? 光盤
其它名稱： 101-399
101-399-ND
28
RabbitCore RCM2000
4.2 Memory I/O Interface
Thirteen of the Rabbit 2000 address lines (A0–A12) and all the data lines (D0–D7) are
available as outputs on the RCM2000. I/0 write (/IOWR), I/0 read (/IORD), buffer enable
(/BUFEN), and Watchdog Output (/WDO) are also available for interfacing to external
devices.
The STATUS output has three different programmable functions:
1. It can be driven low on the first op code fetch cycle.
2. It can be driven low during an interrupt acknowledge cycle.
3. It can also serve as a general-purpose output.
4.2.1 Additional I/0
Although, the output clock is available on the PCLK pin, the output clock is disabled in
software starting with Dynamic C v 7.02 and later. This reduces radiated emissions. The
primary function of PCLK is as a peripheral clock or a peripheral clock ÷ 2, but PCLK can
instead be used as a digital output. See Section 5.2.1, “PCLK Output,” for more informa-
tion.
Two status mode pins, SMODE0 and SMODE1, are available as inputs. The logic state of
these two pins determines the startup procedure after a reset. /RES_IN is an external input
used to reset the Rabbit 2000 microprocessor and RCM2000 memory. /RES_OUT is an
output from the reset circuitry that can be used to reset other peripheral devices.
4.3 Serial Communication
The RCM2000 does not have an RS-232 or an RS-485 transceiver directly on the board.
However, the Prototyping Board does support a industry standard RS-232 transceiver
chip. See Appendix B, “Prototyping Board,” for more information.
4.3.1 Serial Ports
There are four serial ports designated as Serial Ports A, B, C, and D. All four serial ports
can operate in an asynchronous mode up to the baud rate of the system clock divided by
32. An asynchronous port can handle 7 or 8 data bits. A 9th bit address scheme, where an
additional bit is sent to mark the first byte of a message, is also supported. Serial Ports A
and B can be operated alternately in the clocked serial mode. In this mode, a clock line
synchronously clocks the data in or out. Either of the two communicating devices can sup-
ply the clock. When the Rabbit provides the clock, the baud rate can be up to 1/4 of the
system clock frequency, or more than 6.45 Mbps for a 25.8 MHz clock speed.
相關PDF資料
PDF描述
101-0360 KIT DEV RABBIT 2000 INT'L
RCC22DCSH CONN EDGECARD 44POS DIP .100 SLD
EVAL-AD5546SDZ BOARD EVAL FOR AD5546
V48C2E50BL CONVERTER MOD DC/DC 2V 50W
AP2152AFGEG-7 IC PWR SW USB 2CH 0.5A 8-DFN
相關代理商/技術參數
參數描述
10103-C PLAIN ALUMINUM 功能描述:CHASSIS ALUM UNPAINTED 10"LX10"W 制造商:lmb heeger inc. 系列:- 零件狀態:有效 容器類型:底座 大小/尺寸:10.000" 長 x 10.000" 寬（254.00mm x 254.00mm） 高度:3.000"（76.20mm） 面積（L x W）:100"（645cm） 設計:包含蓋 材料:金屬 - 鋁 顏色:未上色 厚度:- 特性:帽蓋（蓋） 等級:- 材料可燃性等級:- 發貨信息:從 Digi-Key 運送 重量:- 標準包裝:1
10103-P PLAIN ALUMINUM 功能描述:CHASSIS ALUM UNPAINTED 10"LX10"W 制造商:lmb heeger inc. 系列:- 零件狀態:有效 容器類型:底座 大小/尺寸:10.000" 長 x 10.000" 寬（254.00mm x 254.00mm） 高度:3.000"（76.20mm） 面積（L x W）:100"（645cm） 設計:包含蓋 材料:金屬 - 鋁 顏色:未上色 厚度:- 特性:帽蓋（蓋） 等級:- 材料可燃性等級:- 發貨信息:從 Digi-Key 運送 重量:- 標準包裝:1
10103-SS-0440-7 制造商:Amatom Electronic Hardware 功能描述:
10103-TB 制造商:Thomas & Betts 功能描述:Cable Accessories Ground Clamp
10104 制造商:Brady Corporation 功能描述: 制造商:Marinco Electrical Group 功能描述: 制造商:Weidmuller 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*