參數資料
型號: 102251238
英文描述: EINSCHRAUBVERB GER O RING 12MM 0.375
中文描述: EINSCHRAUBVERB胃食管反流O型圈12毫米0.375
文件頁數: 17/17頁
文件大小: 269K
代理商: 102251238
Philips Semiconductors Programmable Logic Devices
Product specification
10H20EV8/10020EV8
ECL programmable array logic
October 22, 1993
121
AC TEST CIRCUIT
PULSE
GENERATOR
SCOPE
RT
L1
L3
VCC
VCO1
VCO2
VEE
SCOPE
L2
RT
CL
I1
I11
CLK/I12
FM
FN
FX
FY
DUT
+2.0V + 0.010V
–2.5V + 0.010V FOR 10020EV8
–3.2V + 0.010V FOR 10H20EV8
25
F
0.01
F
NOTES:
1. Use decoupling capacitors of 0.1
F and 25F from GND to VCC, and 0.01F and 25F from GND to VEE (0.01 and 0.1F capacitors
should be NPO Ceramic or MLC type). Decoupling capacitors should be placed as close as physically possible to the DUT and lead
length should be kept to less than 1/4 inch (6mm).
2. All unused inputs should be connected to either HIGH or LOW state consistent with the LOGIC function required.
3. All unused outputs are loaded with 50
to GND.
4. L1 and L2 are equal length 50 impedance lines. L3, the distance from the DUT pin to the junction of the cable from the Pulse
Generator and the cable to the Scope, should not exceed 1/4 inch (6mm).
5. RT = 50 terminator internal to Scope.
6. The unmatched wire stub between coaxial cable and pins under test must be less than 1/4 inch (6mm) long for proper test.
7. CL = Fixture and stray capacitance ≤ 3pF.
8. Any unterminated stubs connected anywhere along the transmission line between the Pulse Generator and the DUT or between the
DUT and the Scope should not exceed 1/4 inch (6mm) in length (refer to section on AC setup procedure).
9. All 50
resistors should have tolerance of ± 1% or better.
10. Test procedures are shown for only one input or set of input conditions. Other inputs are tested in the same manner.
25
F
0.1
F
相關PDF資料
PDF描述
102251248 EINSCHRAUBVERB GER O RING 12MM G0.5
10230-100 IN-LINE ADAPTER 8/DTCH CORD
111DEASCS120.000MHZ Crystal Oscillator
111DEASCT10.000MHZ Crystal Oscillator
111DEASCT120.000MHZ Crystal Oscillator
相關代理商/技術參數
參數描述
102251248 制造商:未知廠家 制造商全稱:未知廠家 功能描述:EINSCHRAUBVERB GER O RING 12MM G0.5
10-225-2-01 制造商:Concord Electronics Inc 功能描述:
1022523 制造商:IAC Industries Inc 功能描述:MTS-I FRAME 72L 3 VERT WSM 1.75
102253 制造商:Vossloh-Schwabe Deutschland 功能描述:
10225-301 制造商:Pentair Technical Products / Hoffman 功能描述:ASSY CMT STD 3UX19"X300 制造商:PENTAIR TECNICAL PRODCUTS 功能描述:ASSY CMT STD 3UX19"X300