SCHURTER GmbH
D
– 79346 Endingen
www.schurter.com
Changes that contribute to technical improvement are subject to alternations
Seite
Erstelldatum:
Ersteller:
nderungsdatum:
Gendert von:
nderungs-Nr.
Datenblatt Nr.
Index
2 of 14
13.06.06
SHO
07.12.2010
Birmelin
10319
105.9515
b
Print date: 14/12/2010 14:51:00
1
DES CRIP TION
-
vandal resistant switch for front panel mounting as well as for complete housings
-
front design is metal made and the mounting style of the front is with 1 mm nearly even,
the switches are lined up with a spacing of 25 mm
-
fixing with a nut M19x0.75 width across flats 22
-
option: anti-rotation mounting with a D-area integrated to the mounting hole, tight
mounting by using indicated sealing ring
-
terminals: two contact pins with a spacing of 7.62 mm
-
available with pins, pins with soldering aid and clip for pins
1.1
Zinc diecasting version
-
- actuator and housing consist of cast zinc
-
- not lettered and not illuminated
-
- ideal for indoor applications
1.2
Zinc-diecasting / Stainless steel version
-
actuator is made of stainless steel and the housing consists of cast zinc
-
optionally: point illumination integrated into the actuator and laser lettering with standard
or customer-specific symbols
1.3
Stainless steel version
-
actuator and housing consist of high-quality stainless steel
-
optionally: point illumination integrated into the actuator and laser lettering with standard
or customer-specific symbols
-
by using this robust weatherproof material, this version is ideal for rough environment and
outdoor applications
1.4
Varnished version
-
two versions: either both housing and actuator are made of cast zinc or the housing is
made of cast zinc and the actuator of stainless steel
-
colour adjustments for customer housings are possible; alternatively, the actuator or the
switch housing can be varnished according to the provided colour specifications; as
standard the signal colours red, green and yellow are available
-
after the laser lettering, the varnished actuators are sealed by transparent lacquer
-
for the zinc-diecasting / stainless steel version, optionally point illumination integrated into
the actuator and laser lettering with standard or customer-specific symbols