參數資料
型號: 12C887
英文描述: Test Prod Wire; Conductor Size AWG:18; No. Strands x Strand Size:65 x 36; Jacket Color:Black; Conductor Material:Copper; Jacket Material:Rubber; Leaded Process Compatible:Yes; Number of Conductors:1 RoHS Compliant: Yes
中文描述: 實時時鐘
文件頁數: 3/19頁
文件大?。?/td> 193K
代理商: 12C887
DS12C887
11 of 19
OSCILLATOR CONTROL BITS
When the DS12C887 is shipped from the factory, the internal oscillator is turned off. This feature
prevents the lithium energy cell from being used until it is installed in a system. A pattern of 010 in bits 4
through 6 of Register A will turn the oscillator on and enable the countdown chain. A pattern of 11X will
turn the oscillator on, but holds the countdown chain of the oscillator in reset. All other combinations of
bits 4 through 6 keep the oscillator off.
SQUARE WAVE OUTPUT SELECTION
Thirteen of the 15 divider taps are made available to a 1-of-15 selector, as shown in the block diagram of
Figure 1. The first purpose of selecting a divider tap is to generate a square wave output signal on the
SQW pin. The RS0–RS3 bits in Register A establish the square wave output frequency. These
frequencies are listed in Table 1. The SQW frequency selection shares its 1-of-15 selector with the
periodic interrupt generator. Once the frequency is selected, the output of the SQW pin can be turned on
and off under program control with the square wave enable bit (SQWE).
PERIODIC INTERRUPT SELECTION
The periodic interrupt will cause the IRQ pin to go to an active state from once every 500ms to once
every 122
s. This function is separate from the alarm interrupt which can be output from once per second
to once per day. The periodic interrupt rate is selected using the same Register A bits which select the
square wave frequency (see Table 1). Changing the Register A bits affects both the square wave
frequency and the periodic interrupt output. However, each function has a separate enable bit in Register
B. The SQWE bit controls the square wave output. Similarly, the periodic interrupt is enabled by the PIE
bit in Register B. The periodic interrupt can be used with software counters to measure inputs, create
output intervals, or await the next needed software function.
PERIODIC INTERRUPT RATE AND SQUARE WAVE OUTPUT FREQUENCY
Table 2
EXT. REG. B
SELECT BITS REGISTER A
E32K
RS3
RS2
RS1
RS0
tPI PERIODIC INTERRUPT
RATE
SQW OUTPUT
FREQUENCY
0
None
0
1
3.90625 ms
256 Hz
0
1
0
7.8125 ms
128 Hz
0
1
122.070 s
8.192 kHz
0
1
0
244.141 s
4.096 kHz
0
1
0
1
488.281 s
2.048 kHz
0
1
0
976.5625 s
1.024 kHz
0
1
1.953125 ms
512 Hz
0
1
0
3.90625 ms
256 Hz
0
1
0
1
7.8125 ms
128 Hz
0
1
0
1
0
15.625 ms
64 Hz
0
1
0
1
31.25 ms
32 Hz
0
1
0
62.5 ms
16 Hz
0
1
0
1
125 ms
8 Hz
0
1
0
250 ms
4 Hz
0
1
500 ms
2 Hz
相關PDF資料
PDF描述
1340TNPC 128 x 64 pixel format, LED Backlight available
1345TMPC Hook-Up Wire; Conductor Size AWG:16; No. Strands x Strand Size:26 x 30; Jacket Color:Orange; Approval Bodies:UL, CSA; Approval Categories:UL AWM Styles 1007, 1565; CSA Types TR-64, TRSR-64; JQA-F; Passes VW-1 Flame Test RoHS Compliant: Yes
1345TNPC Hook-Up Wire; Conductor Size AWG:16; No. Strands x Strand Size:26 x 30; Jacket Color:Orange; Approval Bodies:UL, CSA; Approval Categories:UL AWM Styles 1007, 1565; CSA Types TR-64, TRSR-64; JQA-F; Passes VW-1 Flame Test RoHS Compliant: Yes
1417G5 NetLight 1417G5 and 1417H5-Type ATM/SONET/SDH Transceivers with Clock Recovery
1417G5A NetLight 1417G5 and 1417H5-Type ATM/SONET/SDH Transceivers with Clock Recovery
相關代理商/技術參數
參數描述
12C8B 制造商:Olympic Controls Corporation 功能描述:
12C8T 制造商:Olympic Controls Corporation 功能描述:
12C8X32GI 功能描述:保險絲 Fuse,Cylinder,8x32mm,12A,380V,gI RoHS:否 制造商:Littelfuse 產品:Surface Mount Fuses 電流額定值:0.5 A 電壓額定值:600 V 保險絲類型:Fast Acting 保險絲大小/組:Nano 尺寸:12.1 mm L x 4.5 mm W 安裝風格: 端接類型:SMD/SMT 系列:485
12C90 制造商:OlympicControls Corp/Amperite Co 功能描述:Electromechanical Relay SPST-NC 3A 12VDC 12VAC Through Hole
12C90B 制造商:Olympic Controls Corporation 功能描述: