- 您現在的位置：買賣IC網 > PDF目錄62990 > 130659-E TESTER SO BUS FUER ISDN PDF資料下載
參數資料
| 型號： | 130659-E |
| 英文描述： | TESTER SO BUS FUER ISDN |
| 中文描述： | 測試儀于是巴士富爾綜合業務數字網 |
| 文件頁數： | 1/1頁 |
| 文件大?。?/td> | 45K |
| 代理商： | 130659-E |
SiTi
1a
1b
2a
2b
4
5
3
6
wire
number
terminal
number
1. Check of the NTBA Connection
First the ISDN connection at the NTBA is
checked at normal and at emergency
operation.
means that the NTBA is
connected to the 230 V mains.
means that the NTBA is
connected to the 230 V mains and the
installation is supplied by the Telecom
power supply.
When the
is plugged into the jacks of
the NTBA, the four LEDs light green when
the NTBA is working in normal operation, if
it is running in the emergency mode all
LEDs light red, provided that the NTBA and
the attachment are working correctly.
Normal mode
Emergency mode
not
SiTi
2. Check of the Wall Outlet Installation
The NTBA has to run in normal operation
and the terminating resistors should not be
mounted when the wall outlet installation
is tested. The
is plugged in one jack
after another (see error chart on the back).
SiTi
4. Test Completion
After completing all tests the terminating
resistors are mounted and the ISDN
installation can be put into operation.
3. Enhanced Check for S -Bus Installation
0
If more than one ISDN device is to run at
one ISDN installation it is important that
wires 2a and 2b are not reversed when
terminated.
In order to exclude reversal of these two
wires, wire 2a is interrupted at the first
possibility of the ISDN installation. Now
the
should show at each wall outlet
the interruption of wire 2a.
If it is showing interruption of wire 2b
this proves that wire 2a and 2b have been
reversed.
When all reversals have been detected and
corrected, wire 2a can be reterminated.
SiTi
The
is a simple device for testing the
installation of an ISDN-S -connection.
Checking of the installation is done by
plugging the
into the RJ45 jack. The
terminating resistors should not yet be
mounted.
The four LEDs of the
show the wiring
diagram of the four terminating wires for
the ISDN-installation.
SiTi
0
User Manual SiTi
BTRTELECOM
Test Device for
ISDN Installations
SiTi
Quick and easy testing
with four LEDs
P/N 130 659-E
Error Detection SiTi
all LEDs
light green
all LEDs
are off
all LEDs
light red
all wires are connected
correctly
all wires have been
misconnected
short circuit on the wire pairs
or interruption on at least two
wires of a pair
one or several
LEDs are off
one or several
LEDs light red
misconnection of such
wire of which the related
LED lights red
interruption of such wire of
which the related LED is off
When testing the wall outlets the LEDs on the
will light as follows:
SiTi
By combining those four LEDs with their
different conditions green, red and off, the
can show more than 40 different wiring
conditions. The following chart shows
some examples.
SiTi
LED auf dem SiTi
wire 1a is interrupted
Error
1a
(4)
off
green
green green
green
red
off
green
red
green
red
green green
green
1b
(5)
2a
(3)
2b
(6)
wire 2a is interrupted
wire 1a has been
reversed with wire 2b
wire1b has been
reversed with wire 2b
wire 1b interrupted,
wire 2a connected to
terminal 5 instead of
terminal 3
all wires are
misconnected or
the NTBA is running
in emergency mode
Note:
The
is not meant for steady
operation. Use it only for testing.
SiTi
Designed and manufactured by:
1298/100/01/MAMS/899805-01
Subject
to
technical
change.
BTR
Blumberger
Telefon- und Relaisbau
Albert Metz e. K.
Im Tal 2
D-78176 Blumberg
phone +49 7702/533-0
fax
+49 7702/533-433
btr.telecom@ria-btr.de
www.ria-btr.de
相關PDF資料 |
PDF描述 |
|---|---|
| 130660 | RINGKABELSCHUH ROT 5MM |
| 1307023 | Hook-Up Wire; Conductor Size AWG:10; No. Strands x Strand Size:65 x 28; Jacket Color:White; Approval Bodies:UL, CSA; Approval Categories:UL AWM Style 1015, CSA Type TEW, JQA-F-, Passes VW-1 Flame Test; Conductor Material:Copper RoHS Compliant: Yes |
| 1307028 | Hook-Up Wire; Conductor Size AWG:10; No. Strands x Strand Size:65 x 28; Jacket Color:White; Approval Bodies:UL, CSA; Approval Categories:UL AWM Style 1015, CSA Type TEW, JQA-F-, Passes VW-1 Flame Test; Conductor Material:Copper RoHS Compliant: Yes |
| 1307031 | Hook-Up Wire; Conductor Size AWG:10; No. Strands x Strand Size:65 x 28; Jacket Color:White; Approval Bodies:UL, CSA; Approval Categories:UL AWM Style 1015, CSA Type TEW, JQA-F-, Passes VW-1 Flame Test; Conductor Material:Copper RoHS Compliant: Yes |
| 1307032 | Hook-Up Wire; Conductor Size AWG:10; No. Strands x Strand Size:65 x 28; Jacket Color:Black; Approval Bodies:UL, CSA; Approval Categories:UL AWM Style 1015, CSA Type TEW, JQA-F-, Passes VW-1 Flame Test; Conductor Material:Copper RoHS Compliant: Yes |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 13066 | 制造商:C&K Components 功能描述:PUSHBUTTON - Bulk |
| 130660 | 功能描述:端子 RING 16-22AWG 5MM RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規:26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp |
| 1306600 | 制造商:Rittal 功能描述:AE HYGIENIC 0430H0390W0210D S/S, 16.9 X 15.4 X 8.3 |
| 1306600000 | 功能描述:FLAP PROTECTIVE SK 14/6 20/PK RoHS:是 類別:連接器，互連式 >> 接線座 - 配件 - 標記條 系列:SK 標準包裝:10 系列:CLIPLINE 類型:標簽，卡入式 圖例:自定義 間距:0.591"（15.00mm） 適用于相關產品:CLIPLINE 系列 顏色:白 包裝:散裝 其它名稱:ZB 15:SO/CMSZB15:SO/CMS |
| 130660-E | 制造商:METZ CONNECT USA 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。