Series 519
ZIP Sockets with Staggered Pins
Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
configurations can be furnished, depending on quantities. Aries reserves the
right to change product specifications without notice.
FEATURES:
Designed specifically to fit Mitsubishi, Fujitsu, etc. Dynamic
RAMs, these sockets have collet pins staggered in a zig-zag
configuration.
Side-to-side and end-to-end stackable.
SPECIFICATIONS:
Body material is blue Glass-filled Polyester Thermoplastic.
Pin body is Brass Alloy 360 1/2 hard per UNS C36000
ASTM-B16-85.
Pin body plating is either 200
[5.08m] min. 93/7 Tin/Lead
per MIL-P-81728 or 10
[.25m] min. Gold per MIL-G-45204
over 100
[2.54m] min. Nickel per QQ-N-290.
6-fingered (midget pin is 4-fingered) collet contact is
Beryllium Copper Alloy per UNS C17200 ASTM-B194-92.
Contact plating is either 150
[3.81m] min. 93/7 Tin/Lead
per MIL-P-81728 or 10
[.25m] min. Gold per MIL-G-45204
over 50
[1.27m] min. Nickel per QQ-N-290. Wire wrap
pin available only with 30
[.76] min. Gold on contact.
Contact current rating=3 Amps.
Operating temperature=221°F [105°C] Tin plating,
=257°F [125°C] Gold plating.
Insertion Force=67 grams/pin; Withdrawal Force=30
grams/pin; Normal Force=45 grams/pin; based on a .018
[.46] diameter test lead.
For midget pin: Insertion Force=370 grams/pin; Withdrawal
Force=150 grams/pin; Normal Force=240 grams/pin;
based on a .018 [.46 diameter test lead.
See pin detail below.
MOUNTING CONSIDERATIONS:
See table below.
All tolerances ± .005 [.13]
unless otherwise specified
ORDERING INFORMATION
XX-5X9-XXX
No. of pins:
16, 20, 24, 28
Optional suffix:
T=Tin collet (with Tin
shell only)
M=midget pin (30
[.76
m] Gold collet, Tin
shell only)
Plating:
10=Gold collet/Tin shell
solder tail (& midget)
11=Gold collet/Gold shell
solder tail
30=30
[.76m] Gold collet,
Tin shell wire wrap
Series:
519=solder tail
(& midget)
509=wire wrap
Pin
Style
Sugg. PCB hole dia.
± .002 [.05]
Solder tail
.030 [.76]
Midget solder tail
.040 [1.02]
Wire wrap
.045 [1.14]
SOLDER TAIL
Accepts leads .100-.145
[2.54-3.68] long
MIDGET SOLDER TAIL
Accepts leads .080-.155
[2.16-3.94] long
WIRE WRAP
Accepts leads .110-.160
[2.79-4.06] long
“A”=(NO. OF PINS + 1) X .050 [1.27]
“B”=(NO. OF PINS -1) X .050 [1.27]
Sockets accept leads .015-.025
[.38-.64] in diameter (midget
pin accepts up to .022 [.56]
diameter leads).
ALL DIMENSIONS: INCHES [MILLIMETERS]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
14010
REV.B
NORTH AMERICA
Frenchtown, NJ USA
TEL: (908) 996-6841
FAX:(908) 996-3891
EUROPE
TEL: +44 870 240 0249
FAX: +44 871 919 6033
europe@arieselec.com
http://www.arieselec.com info@arieselec.com
ABCDEFG