21
Catalog 82159
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Revised 12-07
millimeters unless otherwise
reference purposes only.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
www.tycoelectronics.com
are metric equivalents.
to change.
C. America: 52-55-1106-0803
UK: 44-8706-080-208
QUADRA-MATE Wire-to-Printed Circuit Board Terminal
Printed Circuit Board Terminals and Disconnects
Product Facts
■ Redundant wire insulation
displacement termination
■ Built-in strain relief
■ Accepts 28-24 AWG
[0.09-0.2 mm2]
■ Feed-thru connections allow
wiring flexibility
■ Free-standing
■ Low board profile (less than
" [6.35 mm] high)
■ Available in loose piece or
strip form
■ Mass termination
adaptability
■ Capable of being reused
■ Low applied costs
Applications
■ Electronic games
■ Computer
■ Telephone equipment
■ Business machines
■ Electronic control
equipment
Technical Documents
Application Specification
114-2051
Product Specification
108-2032
The QUADRA-MATE Wire-
to-Printed Circuit Board
Terminal is an extension of
the MAG-MATE connector
program, and is designed
to terminate discrete wires
to a pc board via insulation
displacement slot
technology. It is capable of
accepting solid or stranded
wire and permits wire end
or feed-thru terminations.
The terminal features four
slots for redundant wire
terminations and strain
relief. The terminals are
installed in random
positions or in rows on the
edge of a pc board either
by hand tool, semiautomatic
or fully-automatic machines.
The terminal is compact in
design and readily
adaptable to a wide variety
of materials and plating
selections, as well as
terminating techniques
such as daisy chaining,
single ending and on-board
jumping and programming.
The .100 [2.54] wide
terminal has an overall
height of approximately
.210 [5.33] and occupies
less than .120 x .130 [3.05 x
3.3] of board area and
accommodates wire sizes
28-24 AWG [0.09-0.2 mm2]
(see table).
The terminals are supplied
in both loose piece and
strip form and are easily
assembled to the pc board
in conjunction with on-board
components prior to wave
soldering. With the terminal
being an integral part of the
board, insertion of the
unstripped wire into the four
insulation displacement
slots is accomplished by
use of a simple hand tool
(see table).
Thermal Shock Data for
Wire-to-Board Terminal
Cycles of Thermal Shock
Competitive
Terminal
Wire-to-Board
Terminal
A
vera
g
e
T
e
rmination
Resistance—
Milliohms
(.001
ohm)
of
1st
and
5th
Wire
Inser
tions
24 AWG [0.2 mm2]
Solid Wire ––––––––
Stranded Wire –– –– –– ––
PVC Insulation
1 cycle = 1/2 hour at –65° and 1/2 hour at +125°C