11
AMP M Series
Pin and Socket Connectors
Catalog 82003
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Revised 06-08
and inches unless otherwise
reference purposes only.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets are
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
www.tycoelectronics.com
equivalent U.S. Customary Units.
to change.
C. America: 52-55-5-729-0425
UK: 44-141-810-8967
NOTE: All part numbers
are RoHS Compliant
Number of Positions
41
50
75
104
104 CF
160 CF
Component Description
202135-2
201358-1
—
Plug Block
201302-1
200277-2
—
Receptacle Block Phenolic
STANDARD
202135-4
201358-3
—
Plug Block
HOUSINGS
201302-3
200277-4
—
Receptacle Block Diallyl Phthalate
Pages 44 to 51
—
1-201692-6
—
Plug Block
—
Receptacle Block Polyester
—
Long
STRAIN
—
201182-4
—
Short
Nickel Plated Steel
RELIEF
201766-1
201847-1
—
Long
CLAMPS
—
Short
Stainless Steel
Page 88
200389-2
—
Center Male
GUIDE
200390-9
—
Center Female
HARDWARE
—
1-200833-1
—
Corner Male
Stainless Steel
Page 81
—
1-200835-1
—
Corner Female
201921-1
201925-1
—
Male—Nickel Plated Spring Steel
LOCKING SPRINGS1
201922-1
201926-1
—
Female—Stainless Steel
Page 80
—
Internal Open End
Nickel Plated Steel
—
Internal Closed End
Nickel Plated Steel PIN HOODS
—
External Closed End Al Iridite
Pages 82 and 83
—
External Closed End Nickel Plated Steel
Cable-to-Cable (Continued)
1.
Confirm that
Application A (at left) most closely meets
your requirements. (Other applications are shown on
pages 12 through 25.)
2. Find the appropriate column for the number of positions
required.
3. Select part numbers required for the application listed
in the column below the number of positions.
3. If a part number is not listed for a particular item, it is
not available.
3. If more than one part number is listed for a particular
hardware item, choose the one which best fits your
application.
4. Dimensional information is available on the indicated
pages under description column.
5. Select Contacts: Type II (page 30), Type III+ (pages 31
through 35) or Subminiature Coaxial (pages 40, 41).
Special application housings may be substituted
for these standard housings. See Special Application
Section.
This cable-to-cable application utilizes locking springs, strain
relief clamps, a pin hood for pin protection and guide hard-
ware.
The 34 and 50 position connectors can be used with either
center or corner guide hardware. If center guide hardware is
used, an additional four 4-40 screws, nuts and lockwashers are
required to secure the locking springs. Corner guides require
four guide pins and four guide sockets for each mated pair of
connectors.
}
C
onnect
or
/Har
dw
ar
e
Selection
Guide