Special
Connectors
Printed in U.S.A.
E-Mail: sales@glenair.com
G-9
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
2008 Glenair, Inc.
CAGE Codes 06324
www.glenair.com
G
APPLICATION NOTES
1. Material/ Finish:
Shells - Aluminum Alloy / See P/N Development for Plating
Insulators - LCP / N.A.
Contacts - Copper Alloy / Gold Plated
O-Rings - Flourosilicone
2. Assembly to be identified with Glenair's name, part number, date code, and
pin 1 identification.
3. Performance Data per MIL-DTL-835613
4. Interface Dimensions per MIL-DTL-83513
5. Assembly Supplied with 2 Rear Panel Mount JackPosts for 1/16 Thick Panel
6. Termination Footprint per Glenair CBR
(see Glenair Micro-D catalog or www.glenair.com)
7. Plug Assemblies Supplied with EMI Ground Spring.
8. Each Assembly to be Supplied with O-Ring Installed.
9. All Contacts to have Identical Filter Value. Other Filter
Arrangements Available - Contact Factory.
10. DWV - 100 VDC Min.
11. Insulation Resistance: 5000 MegOhms Min. at 200 VDC
12. Metric dimensions (mm) are indicated in parentheses.
247-070
Immersion Proof Micro-D Filter Connector
Right Angle (90°) Printed Circuit Board Mount
TABLE I: CAPACITOR ARRAY CODE
CAPACITANCE RANGE
CLASS
C - CIRCUIT (pF)
A
19,000 - 28,000
B
16,000 - 22,500
C
9,000 - 16,500
D
4,000 - 6,000
E
1,650 - 2,500
F
400 - 650
G
200 - 300
DIMENSIONAL TABLE
SHELL
SIZE
A +/- .005 (.13) B +/- .005 (.13) C +/- .003 (.08)
(D)
E +/- .005 (.13) F +/- .005 (.13)
(G)
9P
1.135 (28.8)
.775 (19.7)
.565 (14.4)
.304 (7.7)
.298 (7.6)
.655 (16.6)
.185 (4.7)
9S
1.135 (28.8)
.775 (19.7)
.565 (14.4)
.358 (9.1)
.298 (7.6)
.655 (16.6)
.235 (6.0)
15P
1.285 (32.6)
.925 (23.5)
.715 (18.2)
.484 (12.3)
.298 (7.6)
.655 (16.6)
.185 (4.7)
15S
1.285 (32.6)
.925 (23.5)
.715 (18.2)
.534 (13.6)
.298 (7.6)
.655 (16.6)
.235 (6.0)
21P
1.435 (36.4)
1.075 (27.3)
.865 (22.0)
.634 (16.1)
.298 (7.6)
.655 (16.6)
.185 (4.7)
21S
1.435 (36.4)
1.075 (27.3)
.865 (22.0)
.684 (17.4)
.298 (7.6)
.655 (16.6)
.235 (6.0)
25P
1.535 (39.0)
1.175 (29.8)
.965 (24.5)
.734 (18.6)
.298 (7.6)
.655 (16.6)
.185 (4.7)
25S
1.535 (39.0)
1.175 (29.8)
.965 (24.5)
.784 (19.9)
.298 (7.6)
.655 (16.6)
.235 (6.0)
31P
1.685 (42.8)
1.325 (33.7)
1.115 (28.3)
.884 (22.5)
.298 (7.6)
.655 (16.6)
.185 (4.7)
31S
1.685 (42.8)
1.325 (33.7)
1.115 (28.3)
.934 (23.7)
.298 (7.6)
.655 (16.6)
.235 (6.0)
37P
1.835 (46.6)
1.475 (37.5)
1.265 (32.1)
1.034 (26.3)
.298 (7.6)
.655 (16.6)
.185 (4.7)
37S
1.835 (46.6)
1.475 (37.5)
1.265 (32.1)
1.084 (27.5)
.298 (7.6)
.655 (16.6)
.235 (6.0)
RECOMMENDED PANEL CUTOUTS
LAYOUT
S +.004 (.1)
-.000 (0)
T +.003 (.08)
-.003 (.08)
W +.004 (.1)
-.000 (0)
9
.408 (10.4)
.565 (14.4)
.256 (6.5)
15
.558 (14.2)
.715 (18.2)
.256 (6.5)
21
.708 (18.0)
.865 (22.0)
.256 (6.5)
25
.808 (20.5)
.965 (24.5)
.256 (6.5)
31
.958 (24.3)
1.115 (28.3)
.256 (6.5)
37
1.108 (28.1)
1.265 (32.1)
.256 (6.5)