Series 181 Thru 184
Flat Pin Staked Flex Jumpers
Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
configurations can be furnished, depending on quantities. Aries reserves the
right to change product specifications without notice.
FEATURES:
Copper conductors embedded between layers of tough, flexible,
flame-retardant insulation.
Consult factory for cable lengths under 2.000 [50.80].
GENERAL SPECIFICATIONS:
Standard cable insulation is white UL VW-1, Style 2643 flame
retardant Polyester (Mylar) adhesive.
High temperature flame retardant cable insulation is Polyimide
(Kapton) insulation with acrylic adhesive.
Cable conductors are solid Copper with a cross-sectional area
equivalent to that of 26 gauge AWG.
Female housing is black UL 94V-0 Glass-filled Thermoplastic
Polyester.
Female and male “crimp-on” pins are spring-tempered Copper
Alloy 510.
Female and male pin plating is 100 [2.54m] min. Tin per MIL-T-
10727 over 50 [1.27m] min. Nickel per QQ-N-290. Female pin
also available with 30 [.76m] min. Gold per MIL-G-45204 in
contact area.
Cable current rating=3 Amps
Cable voltage rating=300 Volts
Cable dielectric strength=2500 Volts/mil, minimum (standard)
=4000 Volts/mil, minimum (high temp)
Cable insulation resistance=1000 MOhms minimum (standard)
=100,000 MOhms (high temp)
Operating temperature=67 to 257°F [-55 to 105°C].
Female housing accepts leads .024-.030 [.61-.76] square,
.150 [3.81] long minimum.
MOUNTING CONSIDERATIONS:
Suggested PCB hole size=.032+ .002 [.81 + .05] dia.
XX-XXXX-18XXXX
ORDERING INFORMATION
NORTH AMERICA
Frenchtown, NJ USA
TEL: (908) 996-6841
FAX: (908) 996-3891
UK/IRELAND/GB
TEL: +44 870 240 0249
FAX: +44 1653 600493
uking@arieselec.com
EUROPE/MAINLAND/HOLLAND
TEL: +31 78 615 94 65
FAX: +31 78 615 43 11
europe@arieselec.com
http://www.arieselec.com info@arieselec.com
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
11019
REV. A
ALL DIMENSIONS: INCHES [MILLIMETERS]
All tolerances ± .005 [.13]
unless otherwise specified
NO
PICTURE
AV
AILABLE
AT
THIS
TIME
No. of
Conductors
(4 thru 40)
Cable Length
“L” in inches
(min. Length
=2.00 [50.80]
Optional Suffix:
HT-High temp.
cable insula-
tion
Jumper Series:
181: male Tin both ends
182: male Tin/female Tin
183: female Tin both ends
184: male Tin/female Gold
185: female Gold both ends
**Aries reserves the right to shop with
or without a polarization stripe nless
otherwise specified by customer
“A”=NO. OF CONDUCTORS X .100 [2.54]
“B”=(NO. OF CONDUCTORS -1) X .100 [2.54]
Kapton is a registered trademark for DuPont