FEATURES / BENEFITS
The signal's intelligence is constantly monitoring all of the critical
parameters that contribute to degradation of LED intensity such
as temperature, drive current and the number of hours of operation.
When the Intelli
LED signal reaches a point that it can no
longer maintain the required intensity, it will give a subtle but clear
TTC (Time-to-Change) visual indication by the way it turns on.
To address the "Green Glare" issue, Intelli
LED signals offer
dimming that is fully compatible to "Phase Cut" dimming used with
conventional incandescent NEMA TS1 & TS2 controllers.
Utilizes Hi-Flux technology to achieve a very uniform appearance,
similar to but better than the incandescent signals they replace.
Consumes up to 40% less power than conventional LED signals,
and over 90% less power than incandescent signals.
Long life; Up to 10 times longer than incandescent signals.
Intelli
LED
Hi-Flux LED Traffic Signal Modules
Dialight Corporation
1501 Route 34 South Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 Fax: (1) 732-751-5778 www.dialight.com
MDTSMODJ001_E
Operating Voltage Range: 80VAC to 135VAC (120VAC nominal)
Convex tinted lens reduces glare & sun reflection
Fuse and transient suppressor incorporated for line and load protection
Operating Temperature Range: -40°C to +74°C
Turn-On/Turn-Off Time = 75 msec max
Power Factor > 0.9
Total Harmonic Distortion < 20%
Meets ITE VTCSH-2 Specification
Meets FCC Title 47, Subpart B, Section 15 Regulations for electrical noise
Conforms to MIL-STD-810F for blowing rain
Provided with quick connect terminals and spade adapters
Written manufacturer’s warranty available upon request
All products traceable by serial number
SPECIFICATIONS