MN54ACTQ04-X REV 2A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC:
VCC 4.5V to 5.5V, Temp. Range: -55C to 125C.
NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT
TESTED.
SYMBOL
PARAMETER
CONDITIONS
NOTES
PIN-
NAME
MIN
MAX
UNIT
SUB-
GROUPS
VILD
Maximum Low Level
Dynamic Input
Voltage
VCC=5.0V, LOAD 50pF / 500 OHMS
6, 9 INPUT
0.8
V
4
VIHD
Minimum High
Level Dynamic
Input Voltage
VCC=5.0V, LOAD 50pF / 500 OHMS
6, 9 INPUT
2.2
V
4
VOLP
Quiet Output
Maximum Dynamic
VOL
VCC=5.0V, LOAD 50pF / 500 OHMS
6, 8 OUTPUT
1.5
V
4
VOLV
Quiet Output
Minimum Dynamic
VOL
VCC=5.0V, LOAD 50pF / 500 OHMS
6, 8 OUTPUT
-1.2
V
4
AC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC:
CL=50pf, RL=500 OHMS, TR=3.0ns & TF=3.0ns, Temp range: -55C to +125C.
NOTE: -55C TEMPERATURE, SUBGROUP
11 IS GUARANTEED BUT NOT TESTED.
tpLH
Propagation Delay
VCC = 4.5V
3,
4, 7
An to
On
1.5
9.0
ns
9
3,
4, 7
An to
On
1.5
10.0
ns
10, 11
tpHL
Propagation Delay
VCC = 4.5V
3,
4, 7
An to
On
1.5
8.5
ns
9
3,
4, 7
An to
On
1.5
9.5
ns
10, 11
tOSLH
Output to Output
Skew
VCC = 4.5V
6
On to
On
1.0
ns
9, 10,
11
tOSHL
Output to Output
Skew
VCC = 4.5V
6
On to
On
1.0
ns
9, 10,
11
Note 1:
SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, &
8.
Note 2:
SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A1, 2, 7, & 8.
Note 3:
SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY SUBGROUP A9.
Note 4:
SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A9 & 10.
Note 5:
TRANSMISSION LINE DRIVING TEST, GUARDBANDED LIMITS SET FOR +25C, 2 MSEC DURATION MAX.
Note 6:
GUARANTEED BUT NOT TESTED. (DESIGN CHARACTERIZATION DATA)
Note 7:
+25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MINIMUM LIMITS.
Note 8:
MAX NUMBER OF OUTPUTS DEFINED AS (N).
DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @
VOL.
Note 9:
MAX NUMBER OF DATA INPUTS (N) SWITCHING. (N-1) INPUTS SWITCHING 0V TO 3V.
INPUT-UNDER-TEST SWITCHING 3V TO THRESHOLD (VILD), 0V TO THRESHOLD (VIHD), FREQ= 1
MHZ.
5