Absolute Maximum Ratings (Note 7)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage
±20V
Power Dissipation (Note 2)
500 mW
Differential Input Current (Note 3)
±10 mA
Input Voltage (Note 4)
±15V
Output Short-Circuit Duration
Continuous
Operating Temperature Range
LM118
55C to +125C
LM218
25C to +85C
LM318
0C to +70C
Storage Temperature Range
65C to +150C
Lead Temperature (Soldering, 10 sec.)
Hermetic Package
300C
Plastic Package
260C
Soldering Information
Dual-In-Line Package
Soldering (10 sec.)
260C
Small Outline Package
Vapor Phase (60 sec.)
215C
Infrared (15 sec.)
220C
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
surface mount devices.
ESD Tolerance (Note 8)
2000V
Electrical Characteristics (Note 5)
Parameter
Conditions
LM118/LM218
LM318
Units
Min
Typ
Max
Min
Typ
Max
Input Offset Voltage
T
A = 25C
2
4
10
mV
Input Offset Current
T
A = 25C
6
50
30
200
nA
Input Bias Current
T
A = 25C
120
250
150
500
nA
Input Resistance
T
A = 25C
1
3
0.5
3
M
Supply Current
T
A = 25C
5
8
5
10
mA
Large Signal Voltage Gain
T
A = 25C, VS = ±15V
50
200
25
200
V/mV
V
OUT = ±10V, RL ≥ 2k
Slew Rate
T
A = 25C, VS = ±15V, AV = 1
50
70
50
70
V/s
(Note 6)
Small Signal Bandwidth
T
A = 25C, VS = ±15V
15
MHz
Input Offset Voltage
615
mV
Input Offset Current
100
300
nA
Input Bias Current
500
750
nA
Supply Current
T
A = 125C
4.5
7
mA
Large Signal Voltage Gain
V
S = ±15V, VOUT = ±10V
25
20
V/mV
R
L ≥ 2k
Output Voltage Swing
V
S = ±15V, RL =2 k
±12
±13
±12
±13
V
Input Voltage Range
V
S = ±15V
±11.5
V
Common-Mode Rejection Ratio
80
100
70
100
dB
Supply Voltage Rejection Ratio
70
80
65
80
dB
Note 2: The maximum junction temperature of the LM118 is 150C, the LM218 is 110C, and the LM318 is 110C. For operating at elevated temperatures, devices
in the H08 package must be derated based on a thermal resistance of 160C/W, junction to ambient, or 20C/W, junction to case. The thermal resistance of the
dual-in-line package is 100C/W, junction to ambient.
Note 3: The inputs are shunted with back-to-back diodes for overvoltage protection. Therefore, excessive current will flow if a differential input voltage in excess of
1V is applied between the inputs unless some limiting resistance is used.
Note 4: For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.
Note 5: These specifications apply for ±5V
≤ VS ≤ ±20V and 55C ≤ TA ≤ +125C (LM118), 25C ≤ TA ≤ +85C (LM218), and 0C ≤ TA ≤ +70C (LM318). Also,
power supplies must be bypassed with 0.1 F disc capacitors.
Note 6: Slew rate is tested with VS = ±15V. The LM118 is in a unity-gain non-inverting configuration. VIN is stepped from 7.5V to +7.5V and vice versa. The slew
rates between 5.0V and +5.0V and vice versa are tested and guaranteed to exceed 50V/s.
Note 7: Refer to RETS118X for LM118H and LM118J military specifications.
Note 8: Human body model, 1.5 k
in series with 100 pF.
LM1
18/LM218/LM318
www.national.com
2