參數資料
      型號: 62S22-N4-090PH
      廠商: GRAYHILL INC
      元件分類: 編、解碼器及復用、解復用
      英文描述: SINGLE, 2 CHANNELS, ROTARY OPTICAL POSITION ENCODER
      文件頁數: 2/2頁
      文件大?。?/td> 237K
      代理商: 62S22-N4-090PH
      Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com
      Optical
      and
      Mechanical
      Encoders
      Optical Encoders
      SPECIFICATIONS
      Environmental Specifications
      Operating Temperture Range: -40°C to 85°C
      Storage Temperature Range: -55°C to 100°C
      Humidity: 96 Hours at 90–95% humidity at
      40°C
      Mechanical Vibration: Harmonic motion with
      amplitude of 15G's, within a varied frequency
      of 10 to 2000 Hz
      Mechanical Shock: Test 1: 100G for 6 mS, half
      sine wave with a velocity change of 12.3 ft/s;
      Test 2: 100G for 6 mS, sawtooth wave with a
      velocity change of 9.7 ft/s
      Rotary Electrical and Mechanical
      Specifications
      Operating Voltage: 5.00 ±0.25 Vdc
      Supply Current: 30mA maximum at 5Vdc
      Output: Open collector phototransistor,
      external pull up resistors are required
      Output Code: 2-Bit quadrature, channel A
      leads channel B by 90° electrically during
      clockwise rotation of the shaft
      Logic Output Characteristics:
      Logic High shall be no less than 3.0 Vdc
      Logic Low shall be no greater than 1.0 Vdc
      Minimum Sink Current: 2.0 mA
      Power Consumption: 150 mW maximum
      Mechanical Life:
      Non-Detent
      3 Million Cycles
      Low & Medium
      1 Million Cycles
      High
      1/2 Million Cycles
      1 cycle is a rotation through all positions and
      a full return
      Average Rotational Torque: H-3.60±1.60
      in-oz, M-2.20±1.40 in-oz, L-1.20±0.50 in-oz,
      N-<0.50 in-oz initially, torque shall be within
      50% of initial value throughout life
      Mounting Torque: 15 in-oz maximum
      Shaft Push-Out Force: 45 lbs minimum
      Shaft Pull-Out Force: 45 lbs minimum
      Terminal Strength: 15 lbs minimum terminal
      pull-out force for cable or header termination
      Solderability: 95% free of pin holes and voids
      Pushbutton Electrical and
      Mechanical Specifications
      Rating: 10 mA at 5 Vdc
      Contact Resistance: <10
      Life: 3 million actuations minimum
      Contact Bounce: <4 ms Make, <10 ms Break
      Actuation Force: 9-950±250 grams, 5-
      510±110 grams, 4-400±100 grams, 3-300±90
      grams, 2-200±75 grams
      Shaft Travel: .020±.010 inch
      Materials and Finishes
      Bushing: Zamak 2
      Shaft: Aluminum or Zamak 2
      Retaining Ring: Stainless steel
      Pushbutton Actuator: Zytel 70G33L
      Detent Spring: Music wire
      Detent Ball: Stainless steel
      Code Housing: Polyamide polymer, nylon 6/
      10 alloy UL94HB
      Code Rotor: Delrin 100
      CIRCUITRY, TRUTH TABLE, AND WAVEFORM Standard Quadrature 2-Bit Code
      Printed Circuit Boards: NEMA grade FR-4,
      double clad with copper, plated with gold over
      nickel
      Infrared Emiting Diode Chips: Gallium
      aluminum arsenide
      Silicon Phototransistor Chips: Gold and
      Aluminum Alloys
      Resistor: Metal oxide on ceramic substrate
      Solder Pins: Brass, plated with tin
      Pushbutton Dome: Stainless steel
      Backplate: Stainless steel
      Cable: Copper stranded with topcoat in PVC
      insulation (Cable version only)
      Connector (.050 Center): PA4.6 with tin/lead
      plated phosphor bronze
      Connector (.100 Center): Nylon UL94V-2, tin
      plated copper alloy
      Label: TT406 Thermal transfer cast film
      Solder: 60/40 Tin lead, no clean – low residue
      flux
      Lubricating Grease: NYE nyogel 774L
      Hex Nut: Nickel, plated with brass
      Lockwasher: Stainless steel
      Header: Hi-Temp glass filled thermoplastic
      UL94V-0, phoshor bronze (pinned versions
      only)
      Strain Relief: Glass filled thermoplastic (.100
      center cable versions only)
      OPTIONS
      Contact Grayhill for custom terminations, shaft
      and bushing configurations, rotational torque
      pushbutton force, and code output. Control
      knobs are also available.
      1
      2
      3
      4
      5
      6
      POWER +5V
      OUTPUT A
      OUTPUT B
      N.O.
      PUSH-
      BUTTON
      SWITCH
      GROUND
      PIN #
      R*
      200
      5%
      * External pull-up resistors required for operation (2.2 k
      ).
      OUTPUT
      A
      OUTPUT
      B
      HIGH
      LOW
      HIGH
      LOW
      POSITION NUMBER
      1
      2
      3
      4
      5
      6
      Indicates logic high; blank indicates
      logic
      low. Code repeats every 4 positions.
      Clockwise Rotation
      Position
      Output A
      Output B
      1
      2
      3
      4
      62SXX-XX-XXXX
      Termination
      C = .050 Center Ribbon Cable with Connector
      S = .050 Center Ribbon Cable with .100 Stripped End
      P = .050 Center Pins with .185 Length
      CH = .100 Center Ribbon Cable with Connector
      SH = .100 Center Ribbon Cable with .100 Stripped End
      PH = .100 Center Pins with .230 Length
      Cable Length
      020 thru 250 in 1/2 inch increments
      3 Digits are eliminated if pinned termination is required.
      Examples:
      060 = 6.0 inch cable
      135 = 13.5 inch cable
      Pushbutton Option
      0 = NO PUSHBUTTON
      4 = 400 Grams
      9 = 950 Grams
      3 = 300 Grams
      5 = 510 Grams
      2 = 200 Grams
      Angle of Throw
      45=45° for Code Change and 8 Detent Positions
      30=30° for Code Change and 12 Detent Positions
      22=22.5° for Code Change and 16 Detent Positions
      18=18° for Code Change and 20 Detent Positions
      15=15° for Code Change and 24 Detent Positions
      11=11.25° for Code Change and 32 Detent Positions
      Rotational Torque Option
      N = Non-detent
      L = Low Torque (available with 0, 4, 5, 9 pushbutton only)
      M = Medium Torque (available with 0, 5, 9 pushbutton only)
      H = High Torque (available with 0, 9 pushbutton only)
      ORDERING INFORMATION
      I-5
      相關PDF資料
      PDF描述
      62F01-01-120P SINGLE, 2 CHANNELS, ROTARY OPTICAL POSITION ENCODER
      62F01-01-180P SINGLE, 2 CHANNELS, ROTARY OPTICAL POSITION ENCODER
      62F01-02-180P-L SINGLE, 2 CHANNELS, ROTARY OPTICAL POSITION ENCODER
      62S30-H9-190PH SINGLE, 2 CHANNELS, ROTARY OPTICAL POSITION ENCODER
      62S30-L0-030P SINGLE, 2 CHANNELS, ROTARY OPTICAL POSITION ENCODER
      相關代理商/技術參數
      參數描述
      62S22-N4-PH 制造商:Grayhill 功能描述:ENCODER, 22.5&DEG, OR 16 POSITIONS, NO DETENT, PUSHBUTTON, P - Bulk 制造商:Grayhill 功能描述:62S22-N4-PH
      62S22-N5-040C 制造商:GRAYHILL 制造商全稱:Grayhill, Inc 功能描述:Compact 1/2' Package
      62S22-N5-040CH 制造商:GRAYHILL 制造商全稱:Grayhill, Inc 功能描述:Compact 1/2' Package
      62S22-N5-040P 制造商:GRAYHILL 制造商全稱:Grayhill, Inc 功能描述:Compact 1/2' Package
      62S22-N5-040PH 制造商:GRAYHILL 制造商全稱:Grayhill, Inc 功能描述:Compact 1/2' Package