參數資料
型號: 78M6613-IM/F
廠商: MAXIM INTEGRATED PRODUCTS INC
元件分類: 電源管理
英文描述: 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, QCC32
封裝: 5 X 5 MM, ROHS COMPLIANT, QFN-32
文件頁數: 30/33頁
文件大?。?/td> 957K
代理商: 78M6613-IM/F
78M6613 Data Sheet
DS_6613_018
6
Rev. 1.1
1.2
Analog Front End (AFE)
The AFE of the 78M6613 is comprised of an input multiplexer, a delta-sigma A/D converter and a
voltage reference.
1.2.1
Input Multiplexer
The input multiplexer supports up to four input signals that are applied to pins A0, A1, A2 and A3 of the
device. Additionally, using the alternate mux selection, it has the ability to select the on-chip
temperature sensor. The multiplexer can be operated in two modes:
During a normal multiplexer cycle, the signals from the A0, A2, A1, and A3 pins are selected.
During the alternate multiplexer cycle, the temperature signal (TEMP) is selected, along with the
signal sources shown in Table 1.
The alternate mux cycles are usually performed infrequently (e.g. every second) by the MPU. Table 1
details the regular and alternative MUX sequences. Missing samples due to an ALT multiplexer
sequence are filled in by the CE.
Table 1: Inputs Selected in Regular and Alternate Multiplexer Cycles
Regular MUX Sequence
ALT MUX Sequence
Mux State
0
1
2
3
0
1
2
3
A0
A1
A2
A3
TEMP
A1
V3P3D
A3
In a typical application, A1 and A3 are connected to current sensors that sense the current on each
branch of the line voltage. A0 and A2 are typically connected to voltage sensors through resistor
dividers. The multiplexer control circuit is clocked by CK32, the 32.768 kHz clock from the PLL block,
and launches with each new pass of the CE program.
1.2.2
A/D Converter (ADC)
A single delta-sigma A/D converter digitizes the voltage and current inputs to the 78M6613. The
resolution of the ADC is 22 bits. Conversion time is two cycles of the CK32 clock.
Initiation of each ADC conversion is controlled by the multiplexer control circuit as described previously.
At the end of each ADC conversion, the FIR filter output data is stored into the CE DRAM location.
1.2.3
FIR Filter
The finite impulse response filter is an integral part of the ADC and it is optimized for use with the
multiplexer. The purpose of the FIR filter is to decimate the ADC output to the desired resolution. At the
end of each ADC conversion, the output data is stored into the fixed CE DRAM location determined by
the multiplexer selection.
1.2.4
Voltage References
The device includes an on-chip precision bandgap voltage reference that incorporates auto-zero
techniques. The reference is trimmed to minimize errors caused by component mismatch and drift. The
result is a voltage output with a predictable temperature coefficient.
相關PDF資料
PDF描述
7901502EA 4-CHANNEL, DIFFERENTIAL MULTIPLEXER, CDIP16
798R07-001 SPECIALTY CONSUMER CIRCUIT, SMA
7MBP100RTJ060 AC MOTOR CONTROLLER, 200 A, XMA25
7WB383DMR2G SGL ENDED MULTIPLEXER, PDSO8
7WB383AMX1TCG SGL ENDED MULTIPLEXER, PBGA8
相關代理商/技術參數
參數描述
78M6613-IMR 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Single-Phase AC Power Measurement IC
78M6613-IMR/F 功能描述:計量片上系統 - SoC Sgl Phase AC Pwr Measurement IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 處理器系列:71M6511 類型:Metering SoC 最大時鐘頻率:70 Hz 程序存儲器大小:64 KB 數據 RAM 大小:7 KB 接口類型:UART 可編程輸入/輸出端數量:12 片上 ADC: 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-64 封裝:Reel
78M6613-IMR/F/P 制造商:Maxim Integrated Products 功能描述:PROGRAMMED - LEAD FREE/TAPE & REEL - Tape and Reel
78M6613-IMR/F/P48 制造商:Maxim Integrated Products 功能描述:SINGLE-PHASE AC POWER-MEASUREMENT IC, 4800 BAUD - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC SENSOR ISOLATED 32QFN 制造商:Maxim Integrated Products 功能描述:8-Bit Programmable Timing Element
78M6613-IMR/F/PC1 功能描述:IC SENSOR ISOLATED 32QFN 制造商:maxim integrated 系列:Teridian?? 包裝:帶卷(TR) 零件狀態:停產 輸入阻抗:40 千歐 ~ 90 千歐 測量誤差:0.5% 電壓 - I/O 高:2V 電壓 - I/O 低:0.8V 電流 - 電源:9.1mA 電壓 - 電源:3 V ~ 3.6 V 表計類型:單相 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:32-VFQFN 裸露焊盤 供應商器件封裝:32-QFN(5x5) 標準包裝:2,500