
DATE:
7/06
MATERIAL STATFREE G2
DRAWING PM-106
STATFREE G2 FLOOR MAT, RUBBER, CONDUCTIVE, .060" (1.5mm)
Black
Electrical Properties:
Property
Test Method
Value
RTG Resistance:
ESD-S7.1
104 - 105 Ohms
RTT Resistance:
ESD-S7.1
104 - 105 Ohms
Electrical Properties by testing to industrial standards by an
independent testing laboratory @ 10 Volts and 50% relative
humidity unless otherwise specified. Complete text of the test
report is available upon request.
Disclaimer:
All statements, technical data, and recommendations contained
herein are based upon tests we believe to be reliable. However,
the accuracy or completeness thereof is not guaranteed. The
proper and correct applications of products and data is the
responsibility of the user. Statements or recommendations not
contained herein shall have no force or effect unless embodied in
a written agreement signed by authorized officers of Desco
Industries, Inc.
Specifications:
Construction:
Homogeneous, SBR, volume
conductive rubber
Thickness:
0.060" (1.52 mm)
Color:*
Black
Texture:*
Low glare, light embossed texture, smooth
Weight:
0.58 lbs/ft2 (0.282 g/cm2 ) nominal
Hardness:
70 Shore A (ASTM D-2240)
Heat Resistance:
0°F to 650°F (-17.8°C to 343.3°C)
Chemical Resistance: Resistance to degradation by inorganic
acids, organic acids, reducing agents,
aliphatic hydrocarbons, mineral oil,
aldehydes, and amines
*Color and texture may vary between lots and mills
Grounding: This material must be properly grounded for optimum
electrial performance. Ask for Technical Bulletin TB-2000 for mat
grounding instructions.
Cleaning: For optimum electrical performance, surface must be
cleaned regularly using an ESD mat cleaner. We suggest using
our Reztore Surface & Mat Cleaner Item #10435 or Static-Wipes
Item #10600. Do not use cleaners with silicone. Silicone buildup
will create an insulative film on the surface.
Description:
This material is designed primarily for floor mat and runner
use, but may also be used in tabletop applications where a
conductive surface is required. Rubber material is heat,
chemical, and abrasion resistant. Solder and flux will not
damage the surface. Material is durable and reversible to
provide long life. It can be cut to configure custom sizes.
Matting materials have a tendency to shrink slightly when first unrolled. In
applications where length is critical, allow the material to relax for at least 4
hours before cutting to size. Always trim with a sharp knife or razor blade.
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
See reverse side for available mat and roll sizes.
NOTE: For applications on smooth
floors, ask for Item #45015 Two
Sided Adhesive Tape to safely secure
product on table tops and floors.
2006 DESCO INDUSTRIES INC.
Employee Owned
Made in America
Limited Lifetime Warranty
Desco warrants for one year that Statfree matting products
will be free of defects in materials and workmanship and will
guarantee dissipative/ conductive mat properties for the life
of the mat. Damage to matting caused by misuse of any
kind, including using inappropriate cleaners is not covered
by Desco Limited Warranty.
Tolerances:
Width +/- .250"
Length +/- .250" every 1
linear foot of running material.
RoHS Compliance Statement
None of the following materials are intentionally added
in manufacturing this product: lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls (PBB)
or polybrominated diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1. See Desco
Industries Inc. letter on-line at Desco.com.