- 您現在的位置：買賣IC網 > PDF目錄144648 > 93-21SYGC/S530-E1/TR8 (EVERLIGHT ELECTRONICS CO LTD) SINGLE COLOR LED, BRILLIANT YELLOW GREEN, 2.7 mm PDF資料下載
參數資料
| 型號： | 93-21SYGC/S530-E1/TR8 |
| 廠商： | EVERLIGHT ELECTRONICS CO LTD |
| 元件分類： | LED |
| 英文描述： | SINGLE COLOR LED, BRILLIANT YELLOW GREEN, 2.7 mm |
| 封裝： | ROHS COMPLIANT, SMD, 2 PIN |
| 文件頁數： | 8/9頁 |
| 文件大小： | 156K |
| 代理商： | 93-21SYGC/S530-E1/TR8 |
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 2
Page: 8 of 9
Device No. : DSE-931-087
Date:30-Nov-2005
Prepared by:Rita Shen
93-21SYGC/S530-XX/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
相關PDF資料 |
PDF描述 |
|---|---|
| 96W-NKL48H-CW0 | SINGLE COLOR LED, WHITE, 7.1 mm |
| 94-NWL15H-NW9 | SINGLE COLOR LED, WHITE |
| 96W-NWL24HD-CW9 | SINGLE COLOR LED, WHITE, 7.1 mm |
| 96-NKL24HD-CW9 | SINGLE COLOR LED, WHITE, 7.1 mm |
| 96-NWL24H-CW0 | SINGLE COLOR LED, WHITE, 7.1 mm |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 93-21UBC | 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:High Performance SMD LED with Reflector |
| 93-21UBC/C430/TR8 | 功能描述:標準LED-SMD Blue RoHS:否 制造商:Vishay Semiconductors 封裝 / 箱體:0402 LED 大小:1 mm x 0.5 mm x 0.35 mm 照明顏色:Red 波長/色溫:631 nm 透鏡顏色/類型:Water Clear 正向電流:30 mA 正向電壓:2 V 光強度:54 mcd 顯示角:130 deg 系列:VLMx1500 封裝:Reel |
| 93-21UTC | 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:High Performance SMD White LED with Reflector |
| 93-21UTC/S400-XX/TR8 | 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:High Performance SMD White LED with Reflector |
| 93-21UYC | 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:High Performance SMD LED with Reflector |
發布緊急采購，3分鐘左右您將得到回復。