參數資料
型號： 935074280518
廠商： NXP SEMICONDUCTORS
元件分類： 尋呼電路
英文描述： TELECOM, PAGING RECEIVER, PQFP32
封裝： 7 X 7 MM, 1.40 MM HEIGHT, PLASTIC, SOT-358-1, LQFP-32
文件頁數： 17/43頁
文件大?。?/td> 525K
代理商： 935074280518
1996 Jan 15
24
Philips Semiconductors
Product specication
Advanced pager receiver
UAA2082
TEST INFORMATION
Tuning procedure for AC tests
1. Turn on the signal generator: fgen =fi(RF) + 4 kHz, no modulation, Vi(RF) = 1 mV (RMS).
2. Measure the IF with a counter connected to test pin TPI. Tune C16 to set the crystal oscillator to achieve fIF = 4 kHz
Change the generator frequency to fgen =fi(RF) 4 kHz and check that fIF is also 4 kHz. For a received input
frequency fi(RF) = 172.941 MHz the crystal frequency is fXTAL = 57.647 MHz, while for fi(RF) = 469.950 MHz the
crystal frequency is fXTAL = 78.325 MHz. For a received input frequency fi(RF) = 930.500 MHz an external oscillator
signal must be used with fi(OSC) = 310.1667 MHz and a level of 15 dBm (for definition of crystal frequency, see
Table 1).
3. Set the signal generator to nominal frequency (fi(RF)) and turn on the modulation deviation ±4.0 kHz, 600 Hz square
wave modulation, Vi(RF) = 1 mV (RMS). Note that the RF signal should be reduced in the following tests, as the
receiver is tuned, to ensure Vo(IF) = 10 to 50 mV (p-p) on test pins TPI or TPQ.
4. Tune C15 (oscillator output circuit) and C12 (frequency multiplier output) to obtain a peak audio voltage on pin TPI.
5. Tune C3 and C6 (RF input and mixer input) to obtain a peak audio voltage on pin TPI. When testing the mixer input
sensitivity tune C23 instead of C3 and C6 (test circuit Fig.5).
6. Check that the output signal on pin TPQ is within 3 dB in amplitude and at 90
° (±20°) relative phase of the signal on
pin TPI.
7. Check that data signal appears on output pin DO and proceed with the AC test.
AC test conditions
Table 5
Denitions for AC test conditions (see Table 6)
SIGNAL
DESCRIPTION
Modulated test signal 1
Frequency
172.941, 469.950 or 930.500 MHz
Deviation
±4.0 kHz
Modulation
1200 baud pseudo random bit sequence
Rise time
250
±25 s (between 10% and 90% of final value)
Modulated test signal 2
Deviation
±2.4 kHz
Modulation
400 Hz sine wave
Other denitions
f1
frequency of signal generator 1
f2
frequency of signal generator 2
f3
frequency of signal generator 3
fcs
channel spacing (20 kHz)
P1
maximum available power from signal generator 1 at the test board input
P2
maximum available power from signal generator 2 at the test board input
P3
maximum available power from signal generator 3 at the test board input
Pi(ref)
maximum available power at the test board input to give a Bit Error Rate (BER)
≤ 3100 for the modulated
test signal 1, in the absence of interfering signals and under the conditions as specified in Chapters
“AC characteristics (173 MHz)”, “AC characteristics (470 MHz)” and “AC characteristics (930 MHz)”
相關PDF資料
PDF描述
935260966005 TELECOM, PAGING RECEIVER, UUC28
0672-0-15-80-30-84-10-0 BERYLLIUM COPPER ALLOY, TIN (100) OVER NICKEL FINISH, PCB TERMINAL
0672-0-15-15-30-27-10-0 BERYLLIUM COPPER ALLOY, GOLD (30) OVER NICKEL FINISH, PCB TERMINAL
0672-0-15-80-30-27-10-0 BERYLLIUM COPPER ALLOY, GOLD (30) OVER NICKEL FINISH, PCB TERMINAL
0672-0-15-15-30-02-10-0 BERYLLIUM COPPER ALLOY, TIN LEAD (100) OVER NICKEL FINISH, PCB TERMINAL
相關代理商/技術參數
參數描述
935079-000 制造商:TE Connectivity 功能描述:55A1841-16-MST4-9CS2275 - Cable Rools/Shrink Tubing
935087-000 制造商:TE Connectivity 功能描述:301A511-51-05/164-0 - Bulk
935087N001 制造商:TE Connectivity 功能描述:301A511-51-05/164-CS7092 制造商:TE Connectivity 功能描述:301A511-51-05/164-CS7092 - Bulk
9350DC-200-0GZZZA 制造商:Siemens 功能描述:
9350DC-200-0ZZZTA 制造商:Siemens 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*