Go to Philips Semiconductors' home page
Select & Go...
Start
part
Catalog & Datasheets
Catalog by Function
Discrete semiconductors
Audio
Clocks and Watches
Data communications
Microcontrollers
Peripherals
Standard analog
Video
Wired communications
Wireless communications
Catalog by System
Automotive
Consumer Multimedia
Systems
Communications
PC/PC-peripherals
Cross reference
Models
Packages
Application notes
Selection guides
Other technical documentation
End of Life information
Datahandbook system
Relevant Links
About catalog tree
About search
About this site
Subscribe to eNews
Catalog & Datasheets
Search
UAA2067G
Information as of 2000-08-19
UAA2067G; Image reject 1800 MHz transceiver for DECT applications
The UAA2067G is a low-power transceiver intended for use in portable and base station transceivers complying with the DECT system.
The IC performs in accordance with specifications in the -30 to +85°C temperature range.
The UAA2067G contains a front-end receiver for the 1800 to 1900 MHz frequency range, a high-frequency VCO for the 1650 to 1850 MHz
range, a low-frequency VCO for the 100 to 140 MHz frequency range and a transmitter with a high-output power amplifier driver stage for
the 1800 to 1900 MHz frequency range. Designed in an advanced BiCMOS process, it combines high performance with low-power
consumption and a high degree of integration, thus reducing external component costs and total radio size.
Its first advantage is to provide typically 34 dB of image rejection in the receiver path. Thus, the image filter between the LNA and the mixer
is redundant and consequently can be removed. The receive section consists of a low-noise amplifier that drives a quadrature mixer pair.
Image rejection is achieved by this RF mixer pair and the two phase shifters in the I and Q channels that phase shift the IF by 45° and 135°
respectively. The two phase shifted IFs are recombined and buffered to furnish the IF output signal.
Signals presented at the RF input at LO - IF frequency are rejected through this signal processing while signals at LO + IF frequency can
form the IF signal.
Its second advantage is to provide a good buffered high-frequency VCO signal to the RX and TX mixers and to the synthesizer-prescaler.
Switching the receive or transmit section on gives a very small change in VCO frequency.
Its third advantage is to provide a good buffered low-frequency VCO signal to the TX mixers, to the synthesizer-prescaler and the second
down conversion mixer in a double conversion receiver. Switching the transmit section on gives a very small change in VCO frequency.
The frequency of each VCO is determined by a resonator network that is external to the IC. Each VCO has a regulated power supply
voltage that has been designed specifically for minimizing a change in frequency due to changes in the power supply voltage, which may be
caused for instance by switching on the power amplifier.
Its fourth advantage is to provide typically 33 dBc of image rejection in the single-sideband up-conversion mixer. Thus the image filter
Description
Features
Applications
Datasheet
Products, packages, availability and ordering
Find similar products
To be kept informed on UAA2067G,
subscribe to eNews.
Subscribe
to eNews
Description