1996 Jul 08
2
Philips Semiconductors
Preliminary specication
Digital Video Encoder (EURO-DENC)
SAA7182; SAA7183
FEATURES
CMOS 5 V device
Digital PAL/NTSC/SECAM encoder
System pixel frequency 13.5 MHz
Accepts MPEG decoded data on 8-bit wide input port.
Input data format Cb, Y, Cr etc. or Y and Cb, Cr on
16 lines (
“CCIR 656”)
Three DACs for CVBS, Y and C operating at 27 MHz
with 10-bit resolution
Three DACs for RGB operating at 27 MHz with 9-bit
resolution, RGB sync on CVBS and Y
CVBS, Y, C and RGB output simultaneously
Closed captioning and teletext encoding including
sequencer and filter
On-chip YUV to RGB matrix
Fast I2C-bus control port (400 kHz)
Encoder can be master or slave
Programmable horizontal and vertical input
synchronization phase
Programmable horizontal sync output phase
Internal Colour Bar Generator (CBG)
Overlay with Look-Up Tables (LUTs) 8 × 3 bytes
Macrovision Pay-per-View protection system as option,
also used for RGB output
This applies to SAA7183 only. The device is protected
by USA patent numbers 461603, 4577216 and 4819098
and other intellectual property rights.
Use of the Macrovision anti-copy process in the device
is licensed for non-commercial home use only. Reverse
engineering or disassembly is prohibited. Please
contact your nearest Philips Semiconductor sales office
for more information
Controlled rise/fall times of output syncs and blanking
Down-mode of DACs
PLCC84 package.
GENERAL DESCRIPTION
The SAA7182; SAA7183 encodes digital YUV video data
to an NTSC, PAL, SECAM CVBS or S-Video signal and
also RGB.
The circuit accepts CCIR compatible YUV data with
720 active pixels per line in 4:2:2 multiplexed formats,
for example MPEG decoded data. It includes a sync/clock
generator and on-chip Digital-to-Analog Converters
(DACs).
The circuit is compatible to the DIG-TV2 chip family.
QUICK REFERENCE DATA
SYMBOL
PARAMETER
MIN.
TYP.
MAX.
UNIT
VDDA
analog supply voltage
4.75
5.0
5.25
V
VDDD
digital supply voltage
4.75
5.0
5.25
V
IDDA
analog supply current
90
110
mA
IDDD
digital supply current
220
250
mA
Vi
input signal voltage levels
TTL compatible
Vo(p-p)
analog output signal voltages Y, C, CVBS and RGB
without load (peak-to-peak value)
2
V
RL
load resistance
80
ILE
LF integral linearity error
±2
LSB
DLE
LF differential linearity error
±1
LSB
Tamb
operating ambient temperature
0
+70
°C