A16
16
Specifications
Approved Standard Ratings
Ratings
Contacts
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following
conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20
±2°C
4. Operating frequency: 20 operations/min
Contact Form
Super-bright LED
Incandescent Lamp
Voltage-reduction Unit (LED Lamp)
Characteristics
Socket Unit
*1. Set and reset constitute one operation.
*2. With LED and incandescent lamp not mounted.
*3. Degree of protection from the front of the panel.
Screw-less Clamp
Operating Characteristics
* Alternate operation models only.
UL, cUL (File No. E41515)
TV (EN60947-5-1) (Low Voltage Directive)
CCC (GB14048.5)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
Note: Certification has been obtained for the Socket Unit.
For detailed information on individual products that
have received certification, consult your supplier.
3 A at 250 VAC
3 A at 30 VDC
5 A at 125 VAC
3 A at 250 VAC
3 A at 30 VDC
Rated voltage
Resistive load
125 VAC
5 A
250 VAC
3 A
30 VDC
3 A
Name
Contact
DPDT
COM
NC
NO
Rated
voltage
Rated
current
Operating
voltage
Internal limiting resistor
5 VDC
8 mA
5 VDC
±5%
Red, yellow, white: 300
Green, blue, pure white: 160
12 VAC/VDC
±5%
Red, yellow, white: 1 k
Green, blue, pure white: 910
24 VAC/VDC
±5% 2.4 k
Rated voltage
Rated current
Operating voltage
6 VAC/VDC
60 mA
5 VAC/VDC
14 VAC/VDC
40 mA
12 VAC/VDC
28 VAC/VDC
24 mA
24 VAC/VDC
Rated voltage
Operating voltage
Applicable lamp
110 VAC/VDC
100/110 VAC/VDC
(90 to 121 V)
A16-24DS
@
LED Lamp
220 VAC/VDC
200/220 VAC/VDC
(180 to 242 V)
Item
Type
Pushbutton Switch
Allowable
operating
frequency
Mechanical
Momentary operation: 120 operations/minute max.
Alternate operation: 60 operations/minute max. *1
Electrical
20 operations/minute max. *1
Insulation resistance
100 M
min. (at 500 VDC)
Dielectric
strength
Between terminals
of same polarity
1,000 VAC, 50/60 Hz for 1 minute
Between terminals
of different polarity
2,000 VAC, 50/60 Hz for 1 minute
Between each ter-
minal and ground
2,000 VAC, 50/60 Hz for 1 minute
Between lamp ter-
minals
1,000 VAC, 50/60 Hz for 1 minute *2
Vibration
resistance
Malfunction
10 to 55 Hz, 1.5-mm double amplitude
(malfunction within 1 ms)
Shock
resistance
Destruction
500 m/s2
Malfunction
150 m/s2 max. (malfunction within 1 ms)
Durability
Mechanical
Momentary operation: 2,000,000 operations min.
Alternate operation: 200,000 operations min. *1
Electrical
100,000 operations min. *1
Electric shock protection class Class II
PTI (tracking characteristic)
175
Degree of contamination
3 (IEC947-5-1)
Approx. 10 g (in the case of a lighted
DPDT switch with solder terminals)
Degree of protection
IP40: A16, Oil-resistant IP65: A165 *3
Ambient operating temperature –10
°C to 55°C (with no icing or condensation)
Ambient operating humidity
35% to 85%RH
Ambient storage temperature
–25
°C to 65°C (with no icing or condensation)
Item
Screw-Less Clamp
Recommended wire size
0.5 mm2 twisted wire or 0.8 mm-dia. solid wire
Usable wires
and tensile
strength
Twisted
wire
0.3 mm2
0.5 mm2
0.75 mm2
1.25 mm2
Solid
wire
0.5 mm
dia.
0.8 mm
dia.
1.0 mm
dia.
—
Tensile
strength
10 N
20 N
30 N
40 N
Length of exposed wire
10
±1mm
Compliant standards
JIS C 2811 Terminal Blocks for Industrial Use
Type
Pushbutton Switch
Characteristics
IP40
Oil-resistant IP65
Operating force (OF) max.
4.41 N
4.91 N
Releasing force (RF) min.
0.29 N
Total travel (TT)
Approx. 3 mm
Pretravel (PT) max.
2.5 mm
Lock travel alternate (LTA) min. *
0.5 mm