參數資料
型號： A21442RNZQE
廠商： ITT CANNON
元件分類： 開關
英文描述： ROTARY SWITCH-2POSITIONS, DPDT, LATCHED, 0.35A, 125VDC, PANEL MOUNT-THREADED
封裝： ROHS COMPLIANT
文件頁數： 5/5頁
文件大?。?/td> 338K
代理商： A21442RNZQE
L–7
L
Rotary
C&K A Series
1-4 Pole Rotary Switches
FUNCTION
AVAILABLE HARDWARE
SPLASHPROOF
BUSHING SEAL
(FIG. 1)
(FIG. 2)
(FIG. 3)
REMOVABLE CLIP
LOCATING
TAB
STANDOFF
K EPOXY & SPLASHPROOF BUSHING SEAL
F SPLASHPROOF BUSHING SEAL
NONE NO SEAL
E
EPOXY SEAL
Stop ring
PART NO.
767B00201
Material: Brass
Finish: Nickel plated
Setting Stops on A112 and A125 Models
The number of switch positions is adjustable on A112
and A125 models only by means of a stop ring provided
with each switch. The number of positions is pre-set on
all other models and the stop ring is factory installed.
Soldering
1. Insert switch base only into PC board.
2. Do not bend terminals.
3. Wave soldering recommended at
500F solder temperature.
4. Hand solder at 500F, 10 sec.
max./terminal.
Switch Assembly
1. Hold housing/shaft assembly by housing. Remove
protective cap by squeezing tabs and discard. (FIG. 1)
2. Do not push on switch shaft. Detent mechanism will
come apart.
3. While holding switch housing, align locating tab on
base with notch on housing and engage 4 housing
latches in slots on base. (FIG. 2)
4. Push firmly on housing until latches snap in place.
5. Remove clip from shaft and discard. Assembly is
complete. (FIG. 3)
Cleaning
1. Flux clean using vapor degreaser and forced
rinse or triple bath method.
2. Do not allow switch base to ‘trap’ fluids.
3. Freon TMC, TF or Methylene Chloride give
excellent results.
To set stops: Turn shaft fully counter-clockwise and
insert stop ring tab in desired hole. Install lockwasher
and nut to retain stop ring for both PC and panel
mounting. Switch without stop ring has 12 positions.
Soldering, Cleaning and Assembly Instructions for ‘MC’ Termination Option
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
相關PDF資料
PDF描述
A214S1MNCBF ROTARY SWITCH-2POSITIONS, DPDT, LATCHED, 0.02A, 20VDC, THROUGH HOLE-STRAIGHT
A214S1MNCGE ROTARY SWITCH-2POSITIONS, DPDT, LATCHED, 0.35A, 125VDC, THROUGH HOLE-STRAIGHT
A214S1MNCQF ROTARY SWITCH-2POSITIONS, DPDT, LATCHED, 0.35A, 125VDC, THROUGH HOLE-STRAIGHT
A214S1RNZG ROTARY SWITCH-2POSITIONS, DPDT, LATCHED, 0.35A, 125VDC, PANEL MOUNT-THREADED
A30303MNMCQF ROTARY SWITCH-3POSITIONS, 3P3T, LATCHED, 0.35A, 125VDC, THROUGH HOLE-STRAIGHT
相關代理商/技術參數
參數描述
A21442RSZQ 制造商:ITT 制造商全稱:ITT Industries 功能描述:1-4 Pole Rotary Switches
A2145 制造商:RAYTHN 功能描述:
A-2145-AA02A-208 制造商:MOLEX 制造商全稱:Molex Electronics Ltd. 功能描述:3.96mm (.156) Pitch KK? PC Board Connector, Right Angle, Nylon Connector,0.38μm (15μ) Gold (Au) Selective, 2 Circuits
A-2145-AA02B-102 制造商:MOLEX 制造商全稱:Molex Electronics Ltd. 功能描述:3.96mm (.156") Pitch KK? PC Board Connector, Right Angle, Nylon Connector, 5.0μm (200μ") Tin (Sn), 2 Circuits
A-2145-AA03A-208 制造商:MOLEX 制造商全稱:Molex Electronics Ltd. 功能描述:3.96mm (.156") Pitch KK? PC Board Connector, Right Angle, Nylon Connector, 0.38μm (15μ") Gold (Au) Selective, 3 Circuits
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*