參數資料
型號: AD5421CREZ
廠商: Analog Devices Inc
文件頁數: 21/36頁
文件大小: 0K
描述: IC DAC 16BIT SPI/SRL 28TSSOP
標準包裝: 50
設置時間: 50µs
位數: 16
數據接口: 串行,SPI?
轉換器數目: 1
電壓電源: 單電源
功率耗散(最大): 625mW
工作溫度: -40°C ~ 105°C
安裝類型: 表面貼裝
封裝/外殼: 28-SOIC(0.173",4.40mm 寬)裸露焊盤
供應商設備封裝: 28-TSSOP 裸露焊盤
包裝: 管件
輸出數目和類型: 1 電壓,單極
采樣率(每秒): *
AD5421
Data Sheet
Rev. G | Page 28 of 36
CONTROL REGISTER
The control register is a read/write register and is addressed as described in Table 12. The data programmed to the control register
determines the mode of operation of the AD5421.
Table 17. Control Register Bit Map
MSB
LSB
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
SPI watchdog timeout
SPI
watchdog
timer
Auto fault
readback
Alarm on
SPI fault
Set min
loop
current
Select
ADC
input
On-chip
ADC
Power down
internal
reference
VLOOP
fault
alert
Reserved
T0
T1
T2
Table 18. Control Register Bit Descriptions
Control Bits
Description
SPI watchdog
timeout
The T0, T1, and T2 bits allow the user to program the watchdog timeout period. The watchdog timer is reset when a valid
write to any AD5421 register occurs or when a NOP command is written.
T0
T1
T2
Timeout Period
0
50 ms
0
1
100 ms
0
1
0
500 ms
0
1
1 sec (default)
1
0
2 sec
1
0
1
3 sec
1
0
4 sec
1
5 sec
SPI watchdog
timer
0 = SPI watchdog timer is enabled (default).
1 = SPI watchdog timer is disabled.
Auto fault
readback
This bit specifies whether the fault register contents are automatically clocked out on the SDO pin on each write operation.
(The fault register can always be addressed for readback.)
0 = fault register contents are clocked out on the SDO pin (default).
1 = fault register contents are not clocked out on the SDO pin.
Alarm on SPI
fault
This bit specifies whether the loop current is forced to the alarm value when an SPI fault is detected (that is, the watchdog
timer times out). When an SPI fault is detected, the SPI fault bit of the fault register and the FAULT pin are always set.
0 = loop current is forced to the alarm value when an SPI fault is detected (default).
1 = loop current is not forced to the alarm value when an SPI fault is detected.
Set min loop
current
0 = normal operation (default).
1 = loop current is set to its minimum value so that the total current flowing in the loop consists only of the operating
current of the AD5421 and its associated circuitry.
Select ADC
input
0 = on-chip ADC measures the voltage between the VLOOP and COM pins (default).
1 = on-chip ADC measures the temperature of the AD5421 die.
On-chip ADC
0 = on-chip ADC is disabled (default).
1 = on-chip ADC is enabled.
Power down
internal
reference
0 = internal voltage reference is powered up (default).
1 = internal voltage reference is powered down and an external voltage reference source is required.
VLOOP fault
alert
This bit specifies whether the FAULT pin is set when the voltage between the VLOOP and COM pins falls to approximately 0.3 V.
(The VLOOP 6V bit of the fault register is always set.)
0 = FAULT pin is not set when the VLOOP COM voltage falls to approximately 0.3 V.
1 = FAULT pin is set when the VLOOP COM voltage falls to approximately 0.3 V.
相關PDF資料
PDF描述
AD5422ACPZ-REEL7 IC DAC 16BIT SRL 40LFCSP
AD5441BRMZ-REEL7 IC DAC 12BIT SERIAL IN 8MSOP
AD5445YRU IC DAC 12BIT PARALL IOUT 20TSSOP
AD5446YRM IC DAC 14BIT MULTIPLYING 10-MSOP
AD5447YRU IC DAC 12BIT DUAL MULT 24-TSSOP
相關代理商/技術參數
參數描述
AD5421CREZ-RL 功能描述:IC DAC 16BIT SPI/SRL 28TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:47 系列:- 設置時間:2µs 位數:14 數據接口:并聯 轉換器數目:1 電壓電源:單電源 功率耗散(最大):55µW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP(0.209",5.30mm 寬) 供應商設備封裝:28-SSOP 包裝:管件 輸出數目和類型:1 電流,單極;1 電流,雙極 采樣率(每秒):*
AD5421CREZ-RL7 功能描述:IC DAC 16BIT SPI/SRL 28TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:47 系列:- 設置時間:2µs 位數:14 數據接口:并聯 轉換器數目:1 電壓電源:單電源 功率耗散(最大):55µW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP(0.209",5.30mm 寬) 供應商設備封裝:28-SSOP 包裝:管件 輸出數目和類型:1 電流,單極;1 電流,雙極 采樣率(每秒):*
AD5422 制造商:AD 制造商全稱:Analog Devices 功能描述:Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC
AD5422ACPZ 制造商:AD 制造商全稱:Analog Devices 功能描述:Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC
AD5422ACPZ-REEL 功能描述:IC DAC 16BIT SRL 40LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:47 系列:- 設置時間:2µs 位數:14 數據接口:并聯 轉換器數目:1 電壓電源:單電源 功率耗散(最大):55µW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP(0.209",5.30mm 寬) 供應商設備封裝:28-SSOP 包裝:管件 輸出數目和類型:1 電流,單極;1 電流,雙極 采樣率(每秒):*