- 您現在的位置：買賣IC網 > PDF目錄8555 > AD569KN (Analog Devices Inc)IC DAC 16BIT MONO NON-LIN 28-DIP PDF資料下載
參數資料
| 型號： | AD569KN |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 10/12頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC DAC 16BIT MONO NON-LIN 28-DIP |
| 產品培訓模塊： | Data Converter Fundamentals DAC Architectures |
| 標準包裝： | 1 |
| 設置時間： | 4µs |
| 位數： | 16 |
| 數據接口： | 并聯 |
| 轉換器數目： | 1 |
| 電壓電源： | 雙 ± |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 通孔 |
| 封裝/外殼： | 28-DIP（0.600"，15.24mm） |
| 供應商設備封裝： | 28-PDIP |
| 包裝： | 管件 |
| 輸出數目和類型： | 1 電壓，單極；1 電壓，雙極 |
| 采樣率（每秒）： | * |
AD569
REV. A
–7–
benefit is that, should a Zener diode fail (a short circuit would
be the most likely failure), the supply voltage decreases. This
differs from the situation where the diode is used as a series
regulator. In that case, a failure would place the unregulated
supply voltage on the AD569 terminal.
a. Zener Regulates Negative Supply
b. Diodes Regulate Both Supplies
c. Use of
±15 V and ±5 V Supplies
d. AD588 Produces References and Supply Voltages
Figure 7. Power Supply Options
ANALOG CIRCUIT CONNECTIONS
The AD569 is intended for use in applications where high reso-
lution and stability are critical. Designed as a multiplying D/A
converter, the AD569 may be used with a fixed dc reference or
an ac reference. VREF may be any voltage or combination of
voltages at +VFORCE and –VFORCE that remain within the bounds
set for reference voltages as discussed in the power supply range
section. Since the AD569 is a multiplying D/A converter, its
output voltage, VOUT, is proportional to the product of the digi-
tal input word and the voltage at the reference terminal. The
transfer function is VOUT = DVREF where D is the fractional bi-
nary value of the digital word applied to the converter using
offset-binary coding. Therefore, the output will range from
–VREF for a digital input code of all zeros (0000H) to +VREF for
an input code of all ones (FFFFH).
For applications where absolute accuracy is not critical, the
simple reference connection in Figure 8 can be used. Using only
the reference force inputs, this configuration maintains linearity
and 16-bit monotonicity, but introduces small, fixed offset and
gain errors. These errors are due to the voltage drops across re-
sistors RA and RB shown in Figure 9. With a 10 V reference
voltage, the gain and offset errors will range from 80 mV to
100 mV. Resistors RA and RB were included in the first resistor
string to avoid degraded linearity due to uneven current densi-
ties at the string’s endpoints. Similarly, linearity would degrade
if the reference voltage were connected across the reference
sense terminals. Note that the resistance between the force and
sense terminals cannot be measured with an ohmmeter; the lay-
out of the thin-film resistor string adds approximately 4 k
of
resistance (RS) at the sense tap.
Figure 8. Simple Reference Connection
For those applications in which precision references and high
accuracy are critical, buffer amplifiers are used at +VREF and
–VREF as shown in Figure 10 to force the voltage across resistors
R1 to R256. This insures that any errors induced by currents
flowing through the resistances of the package pins, bond wires,
aluminum interconnections, as well as RA and RB are mini-
mized. Suitable amplifiers are the AD517, AD OP07, AD OP27,
or the dual amplifier, the AD712. Errors will arise, however, as
the buffer amplifiers’ bias currents flow through RS (4 k
). If
the bias currents produce such errors, resistance can be inserted
at the noninverting terminal (RBC) of the buffer amplifiers to
compensate for the errors.
相關PDF資料 |
PDF描述 |
|---|---|
| VI-J2Y-MZ-B1 | CONVERTER MOD DC/DC 3.3V 16.5W |
| AD5373BSTZ-REEL | IC DAC 14BIT 32CH SER 64-LQFP |
| VE-J5K-MZ-B1 | CONVERTER MOD DC/DC 40V 25W |
| AD568JQ | IC DAC 12BIT HS MONO 35NS 24CDIP |
| VE-J5J-MZ-B1 | CONVERTER MOD DC/DC 36V 25W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD569KNZ | 功能描述:IC DAC 16BIT MONOTONIC 28-DIP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 設置時間:4µs 位數:12 數據接口:串行 轉換器數目:2 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP，8-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:8-uMAX 包裝:管件 輸出數目和類型:2 電壓，單極 采樣率（每秒）:* 產品目錄頁面:1398 (CN2011-ZH PDF) |
| AD569KP | 制造商:Analog Devices 功能描述:DAC 1-CH Resistor-String 16-bit 28-Pin PLCC 制造商:Rochester Electronics LLC 功能描述:IC,MONO 16-BIT D/A CONV - Bulk 制造商:Analog Devices 功能描述:IC SEMICONDUCTOR ((NS)) |
| AD569KPZ | 功能描述:IC DAC 16BIT MONO NON-LIN 28PLCC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:1 系列:- 設置時間:4.5µs 位數:12 數據接口:串行，SPI? 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:8-SOICN 包裝:剪切帶 (CT) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:* 其它名稱:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND |
| AD569SD | 功能描述:數模轉換器- DAC IC MONO 16-BIT RoHS:否 制造商:Analog Devices 轉換器數量:4 DAC 輸出端數量:4 轉換速率: 分辨率:12 bit 接口類型:Serial (I2C) 穩定時間: 最大工作溫度:+ 105 C 安裝風格: 封裝 / 箱體:TSSOP 封裝:Reel |
| AD569SD/883B | 功能描述:數模轉換器- DAC IC MONO 16-BIT D/A CONV RoHS:否 制造商:Texas Instruments 轉換器數量:1 DAC 輸出端數量:1 轉換速率:2 MSPs 分辨率:16 bit 接口類型:QSPI, SPI, Serial (3-Wire, Microwire) 穩定時間:1 us 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-14 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。