參數資料
型號： AD5722AREZ-REEL7
廠商： Analog Devices Inc
文件頁數： 19/32頁
文件大?。?/td> 0K
描述： IC DAC DUAL 12BIT 1LSB 24TSSOP
產品培訓模塊： Data Converter Fundamentals
DAC Architectures
設計資源： Software Configurable 12-Bit Dual-Channel Unipolar/Bipolar Voltage Output Using AD5722 (CN0094)
標準包裝： 1,000
設置時間： 10µs
位數： 12
數據接口： 串行
轉換器數目： 2
電壓電源： 模擬和數字，雙 ±
功率耗散（最大）： 190mW
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 24-TSSOP（0.173"，4.40mm）裸露焊盤
供應商設備封裝： 24-TSSOP 裸露焊盤
包裝： 帶卷 (TR)
輸出數目和類型： 2 電壓，單極；2 電壓，雙極
采樣率（每秒）： *
AD5722/AD5732/AD5752
Rev. D | Page 26 of 32
CONTROL REGISTER
The control register is addressed by setting the three REG bits to 011. The value written to the address and data bits determines the
control function selected. The control register options are shown in Table 23 and Table 24.
Table 23. Programming the Control Register
MSB
LSB
R/W
Zero
REG2
REG1
REG0
A2
A1
A0
DB15 to DB4
DB3
DB2
DB1
DB0
0
1
0
NOP, data = don’t care
0
1
0
1
Don’t care
TSD enable
Clamp enable
CLR select
SDO disable
0
1
0
Clear, data = don’t care
0
1
0
1
Load, data = don’t care
Table 24. Explanation of Control Register Options
Option
Description
NOP
No operation instruction used in readback operations.
Clear
Addressing this function sets the DAC registers to the clear code and updates the outputs.
Load
Addressing this function updates the DAC registers and, consequently, the DAC outputs.
SDO Disable
Set by the user to disable the SDO output. Cleared by the user to enable the SDO output (default).
CLR Select
See Table 25 for a description of the CLR select operation.
Clamp Enable
Set by the user to enable the current-limit clamp. The channel does not power down upon detection of an overcurrent; the
current is clamped at 20 mA (default).
Cleared by the user to disable the current-limit clamp. The channel powers down upon detection of an overcurrent.
TSD Enable
Set by the user to enable the thermal shutdown feature. Cleared by the user to disable the thermal shutdown feature (default).
Table 25. CLR Select Options
Output CLR Value
CLR Select Setting
Unipolar Output Range
Bipolar Output Range
0
0 V
1
Midscale
Negative full-scale
POWER CONTROL REGISTER
The power control register is addressed by setting the three REG bits to 010. This register allows the user to control and determine the
power and thermal status of the AD5722/AD5732/AD5752. The power control register options are shown in Table 26 and Table 27.
Table 26. Programming the Power Control Register
MSB
LSB
R/W
Zero
REG2
REG1
REG0
A2
A1
A0
DB15 to
DB11
DB10
DB9
DB8
DB7
DB6
DB5
DB4
DB3
DB2
DB1
DB0
0
1
0
X
0
OCB
X
OCA
X
TSD
X
PUB
X
PUA
Table 27. Power Control Register Functions
Option
Description
PUA
DAC A power-up. When set, this bit places DAC A in normal operating mode. When cleared, this bit places DAC A in power-down
mode (default). After setting this bit to power DAC A, a power-up time of 10 μs is required. During this power-up time, the DAC
register should not be loaded to the DAC output (see the Load DAC (LDAC) section). If the clamp enable bit of the control register
is cleared, DAC A powers down automatically on detection of an overcurrent, and PUA is cleared to reflect this.
PUB
DAC B power-up. When set, this bit places DAC B in normal operating mode. When cleared, this bit places DAC B in power-down
mode (default). After setting this bit to power DAC B, a power-up time of 10 μs is required. During this power-up time, the DAC
register should not be loaded to the DAC output (see the Load DAC (LDAC) section). If the clamp enable bit of the control register
is cleared, DAC B powers down automatically on detection of an overcurrent, and PUB is cleared to reflect this.
TSD
Thermal shutdown alert (read-only bit). In the event of an overtemperature situation, both DACs are powered down and this bit is set.
OCA
DAC A overcurrent alert (read-only bit). In the event of an overcurrent situation on DAC A, this bit is set.
OCB
DAC B overcurrent alert (read-only bit). In the event of an overcurrent situation on DAC B, this bit is set.
相關PDF資料
PDF描述
V300A2H160B3 CONVERTER MOD DC/DC 2V 160W
AD5410ACPZ-REEL IC DAC 12BIT SRL 40LFCSP
V300A2H160B CONVERTER MOD DC/DC 2V 160W
V150A28H400BG CONVERTER MOD DC/DC 28V 400W
VI-2N0-MW-F1 CONVERTER MOD DC/DC 5V 100W
相關代理商/技術參數
參數描述
AD5722R 制造商:AD 制造商全稱:Analog Devices 功能描述:Complete, Dual, 12-/14-/16-Bit, Serial Input, Unipolar/Bipolar, Voltage Output DACs
AD5722RBREZ 功能描述:IC DAC DUAL 12BIT 1LSB 24TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 設置時間:4µs 位數:12 數據接口:串行 轉換器數目:2 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP，8-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:8-uMAX 包裝:管件 輸出數目和類型:2 電壓，單極 采樣率（每秒）:* 產品目錄頁面:1398 (CN2011-ZH PDF)
AD5722RBREZ-REEL7 功能描述:IC DAC DUAL 12BIT 1LSB 24TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:47 系列:- 設置時間:2µs 位數:14 數據接口:并聯 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:55µW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:28-SSOP 包裝:管件 輸出數目和類型:1 電流，單極；1 電流，雙極 采樣率（每秒）:*
AD5724 制造商:AD 制造商全稱:Analog Devices 功能描述:Complete, Quad, 12-/14-/16-Bit, Serial Input, Unipolar/Bipolar Voltage Output DACs
AD5724AREZ 功能描述:IC DAC 12BIT DSP/SRL 24TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:1 系列:- 設置時間:4.5µs 位數:12 數據接口:串行，SPI? 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:8-SOICN 包裝:剪切帶 (CT) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:* 其它名稱:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*