- 您現在的位置：買賣IC網 > PDF目錄10181 > AD7691BRMZ-RL7 (Analog Devices Inc)IC ADC 18BIT SAR 250KSPS 10-MSOP PDF資料下載
參數資料
| 型號： | AD7691BRMZ-RL7 |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 6/28頁 |
| 文件大小： | 0K |
| 描述： | IC ADC 18BIT SAR 250KSPS 10-MSOP |
| 標準包裝： | 1,000 |
| 系列： | PulSAR® |
| 位數： | 18 |
| 采樣率（每秒）： | 250k |
| 數據接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 轉換器數目： | 1 |
| 功率耗散（最大）： | 12.5mW |
| 電壓電源： | 模擬和數字 |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 10-TFSOP，10-MSOP（0.118"，3.00mm 寬） |
| 供應商設備封裝： | 10-MSOP |
| 包裝： | 帶卷 (TR) |
| 輸入數目和類型： | 1 個差分，雙極 |
| 配用： | EVAL-AD7691CBZ-ND - BOARD EVALUATION FOR AD7691CBZ |
第1頁第2頁第3頁第4頁第5頁當前第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁
AD7691
Data Sheet
Rev. C | Page 14 of 28
THEORY OF OPERATION
SW+
MSB
65,536C
IN+
LSB
COMP
CONTROL
LOGIC
SWITCHES CONTROL
BUSY
OUTPUT CODE
CNV
REF
GND
IN–
4C
2C
C
131,072C
SW–
MSB
65,536C
LSB
4C
2C
C
131,072C
0
61
46
-02
4
Figure 27. ADC Simplified Schematic
CIRCUIT INFORMATION
The AD7691 is a fast, low power, single-supply, precise, 18-bit
ADC using a successive approximation architecture.
The part is capable of converting 250,000 samples per second
(250 kSPS) and powers down between conversions. When
operating at 1 kSPS, for example, it consumes 50 μW typically,
which is ideal for battery-powered applications.
The AD7691 provides the user with an on-chip track-and-hold
and does not exhibit pipeline delay or latency, making it ideal
for multiple multiplexed channel applications.
The AD7691 is specified from 2.3 V to 5.25 V and can be
interfaced to any 1.8 V to 5 V digital logic family. It is housed in
a 10-lead MSOP or a tiny 10-lead QFN (LFCSP) that combines
space savings and allows flexible configurations.
The part is pin-for-pin compatible with the 18-bit AD7690 as
well as the 16-bit AD7687 and AD7688.
CONVERTER OPERATION
The AD7691 is a successive approximation ADC based on a
charge redistribution DAC. Figure 27 shows the simplified
schematic of the ADC. The capacitive DAC consists of two
identical arrays of 18 binary-weighted capacitors, which are
connected to the two comparator inputs.
During the acquisition phase, terminals of the array tied to the
comparator’s input are connected to GND via SW+ and SW.
All independent switches are connected to the analog inputs.
Thus, the capacitor arrays are used as sampling capacitors and
acquire the analog signal on the IN+ and IN inputs. When the
acquisition phase is complete and the CNV input goes high, a
conversion phase is initiated. When the conversion phase
begins, SW+ and SW are opened first. The two capacitor
arrays are then disconnected from the inputs and connected to
the GND input. Therefore, the differential voltage between the
inputs IN+ and IN captured at the end of the acquisition phase
is applied to the comparator inputs, causing the comparator to
become unbalanced. By switching each element of the capacitor
array between GND and REF, the comparator input varies by
binary-weighted voltage steps (VREF/2, VREF/4 ... VREF/262,144).
The control logic toggles these switches, starting with the MSB,
to bring the comparator back into a balanced condition. After
the completion of this process, the part returns to the
acquisition phase, and the control logic generates the ADC
output code and a busy signal indicator.
Because the AD7691 has an on-board conversion clock, the
serial clock, SCK, is not required for the conversion process.
Transfer Functions
The ideal transfer characteristic for the AD7691 is shown in
100...000
100...001
100...010
011...101
011...110
011...111
A
D
C
CO
DE
(T
W
O
S
CO
M
P
L
E
M
E
NT
)
ANALOG INPUT
+FSR – 1.5LSB
+FSR – 1LSB
–FSR + 1LSB
–FSR
–FSR + 0.5LSB
06
14
6-
0
06
Figure 28. ADC Ideal Transfer Function
Table 9. Output Codes and Ideal Input Voltages
Description
Analog Input
VREF = 5 V
Digital Output
Code (Hex)
FSR 1 LSB
+4.999962 V
Midscale + 1 LSB
+38.15 μV
0x00001
Midscale
0 V
0x00000
Midscale 1 LSB
38.15 μV
0x3FFFF
FSR + 1 LSB
4.999962 V
0x20001
FSR
5 V
1 This is also the code for an overranged analog input (VIN+ VIN above VREF VGND).
2 This is also the code for an underranged analog input (VIN+ VIN below VGND).
相關PDF資料 |
PDF描述 |
|---|---|
| MS3106F24-22S | CONN PLUG 4POS STRAIGHT W/SCKT |
| VE-B7J-MY | CONVERTER MOD DC/DC 36V 50W |
| ADM3307EARUZ-REEL7 | IC TXRX RS-232 5:3 2.7V 28TSSOP |
| CXS3106A282P | CONN PLUG 14POS STRGHT PIN |
| LTC2850CDD#TRPBF | IC TXRX RS485 20MBPS 8-DFN |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7693 | 制造商:AD 制造商全稱:Analog Devices 功能描述:16-Bit Lower Power |
| AD76931 | 制造商:AD 制造商全稱:Analog Devices 功能描述:18-Bit, 2 MSPS PulSAR 15 mW ADC in LFCSP (QFN) |
| AD7693BCPZ | 制造商:Analog Devices 功能描述:ADC SGL SAR 500KSPS 16BIT SERL 10LFCSP - Rail/Tube |
| AD7693BCPZ-R2 | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD7693BCPZRL | 功能描述:IC ADC 16BIT 500KSPS 10LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:PulSAR® 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極 |
發(fā)布緊急采購，3分鐘左右您將得到回復。