參數資料
型號： AD7710AN
廠商： Analog Devices Inc
文件頁數： 17/32頁
文件大?。?/td> 0K
描述： IC ADC SIGNAL CONDITIONING 24DIP
標準包裝： 15
位數： 24
采樣率（每秒）： 1.03k
數據接口： 串行
轉換器數目： 1
功率耗散（最大）： 45mW
電壓電源： 模擬和數字，雙 ±
工作溫度： -40°C ~ 85°C
安裝類型： 通孔
封裝/外殼： 24-DIP（0.300"，7.62mm）
供應商設備封裝： 24-PDIP
包裝： 管件
輸入數目和類型： 2 個差分，單極；2 個差分，雙極
REV. G
–24–
AD7710
SIMPLIFYING THE EXTERNAL CLOCKING MODE
INTERFACE
In many applications, the user may not need to write to the on-chip
calibration registers. In this case, the serial interface to the AD7710
in external clocking mode can be simplified by connecting the
TFS
line to the A0 input of the AD7710 (see Figure 14). This means
that any write to the device will load data to the control register
(because A0 is low while
TFS is low), and any read to the de-
vice will access data from the output data register or from the
calibration registers (because A0 is high while
RFS is low). Note
that in this arrangement the user does not have the capability of
reading from the control register.
AD7710
SDATA
SCLK
TFS
A0
FOUR
INTERFACE
LINES
RFS
Figure 14. Simplified Interface with
TFS Connected to A0
Another method of simplifying the interface is to generate the
TFS signal from an inverted RFS signal. However, generating
the signals the opposite way around (
RFS from an inverted
TFS) will cause writing errors.
MICROCOMPUTER/MICROPROCESSOR INTERFACING
The AD7710’s flexible serial interface allows for easy interface
to most microcomputers and microprocessors. Figure 15 shows
a flowchart for a typical programming sequence for reading data
from the AD7710 to a microcomputer, while Figure 16 shows a
flowchart for writing data to the AD7710. Figures 17, 18, and
19 show some typical interface circuits.
Figure 15 shows continuous read operations from the AD7710
output register, where the
DRDY line is continuously polled.
Depending on the microprocessor configuration, the
DRDY line
may come to an interrupt input, in which case the
DRDY will
automatically generate an interrupt without being polled. Read-
ing the serial buffer could be anything from one read operation
up to three read operations (where 24 bits of data are read into
an 8-bit serial register). A read operation to the control/calibra-
tion registers is similar, but, in this case, the status of
DRDY
can be ignored. The A0 line is brought low when the
RFS line
is brought low during a read register.
The flowchart also shows the bits being reversed after they have
been read in from the serial port. This depends on whether the
microprocessor expects the MSB of the word first or the LSB of
the word first. The AD7710 outputs the MSB first.
Figure 16 shows a single 24-bit write operation to the AD7710
control or calibration registers. This shows data being trans-
ferred from data memory to the accumulator before being writ-
ten to the serial buffer. Some microprocessor systems allow data
to be written directly to the serial buffer from data memory.
Writing data to the serial buffer from the accumulator generally
consists of either two or three write operations, depending on
the size of the serial buffer.
NO
YES
BRING
RFS LOW
3
REVERSE
ORDER OF BITS
BRING
RFS HIGH
POLL DRDY
CONFIGURE AND
INITIALIZE
C/ P
SERIAL PORT
DRDY
LOW?
BRING
RFS, TFS HIGH
START
READ
SERIAL BUFFER
Figure 15. Flowchart for Continuous Read Operations
to the AD7710
Figure 16 also shows the option of the bits being reversed before
being written to the serial buffer. This depends on whether the
first bit transmitted by the microprocessor is the MSB or the
LSB. The AD7710 expects the MSB as the first bit in the data
stream. In cases where the data is being read or being written in
bytes and the data has to be reversed, the bits have to be reversed
for every byte.
相關PDF資料
PDF描述
VE-24Z-MV-F3 CONVERTER MOD DC/DC 2V 60W
IDT72V221L15JI8 IC FIFO SYNC 1KX9 15NS 32PLCC
LT1785AHN8#PBF IC TXRX RS485/RS422 60V 8-DIP
LTC2380IDE-16#TRPBF IC ADC 16BIT 2MSPS 16-DFN
IDT72V221L10J8 IC FIFO SYNC 1KX9 10NS 32PLCC
相關代理商/技術參數
參數描述
AD7710ANZ 功能描述:IC ADC SIGNAL CONDITIONING 24DIP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6
AD7710AQ 功能描述:IC ADC 24BIT DIFF INP 24-CDIP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極
AD7710AR 功能描述:IC ADC 24BIT DIFF INP 24-SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極
AD7710AR-REEL 功能描述:IC ADC 24BIT DIFF INP 24-SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極
AD7710AR-REEL7 功能描述:IC ADC 24BIT DIFF INP 24-SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*