- 您現在的位置：買賣IC網 > PDF目錄6035 > AD8010ARZ (Analog Devices Inc)IC OPAMP CF 200MA LP 8SOIC PDF資料下載
參數資料
| 型號： | AD8010ARZ |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 2/12頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC OPAMP CF 200MA LP 8SOIC |
| 標準包裝： | 98 |
| 放大器類型： | 電流反饋 |
| 電路數： | 1 |
| 轉換速率： | 800 V/µs |
| -3db帶寬： | 230MHz |
| 電流 - 輸入偏壓： | 10µA |
| 電壓 - 輸入偏移： | 5000µV |
| 電流 - 電源： | 15.5mA |
| 電流 - 輸出 / 通道： | 200mA |
| 電壓 - 電源，單路/雙路(±)： | 9 V ~ 12 V，±4.5 V ~ 6 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 8-SOIC（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 8-SOIC |
| 包裝： | 管件 |
| 產品目錄頁面： | 769 (CN2011-ZH PDF) |
AD8010
–10–
REV. B
Differential Line Driver
Twisted pair transmission lines are more often being used for
high frequency analog and digital signals. Over long distances,
however, the attenuation characteristics of these lines can
degrade the performance of the transmission system. To com-
pensate for this, larger signals are transmitted, which after the
attenuation, will still have useful signal strength.
The high output current of two AD8010s can be used along
with a transformer to create a high power differential line driver.
The differential configuration effectively doubles the output
swing, while the step-up transformer further increases the out-
put voltage.
In the circuit in Figure 31 the A device is configured as a gain-
of-two follower, while the B device is a gain-of-two inverter.
These will produce a differential output signal whose maximum
value is twice the peak-to-peak value of the maximum output
of one device. For this circuit a 12 V peak-to-peak output can
be obtained.
The op amps drive a 1:2 step-up transformer that drives a
100
transmission line. Since the impedance reflected back to
the primary varies as the square of the turns ratio, it will appear
as 25
at the primary. This source terminating resistor is split
as a 12.4
resistor at the output of each device.
The circuit shown is capable of delivering 12 V p-p to the line
and operates with a –3 dB bandwidth of 40 MHz. The peak
current output of either op amp is 100 mA.
AD8010
VIN
499
150
402
AD8010
150
806
12.4
+6
–6
1:2
100
Figure 31. High Output Differential Line Driver Using Two AD8010s.
NOTE: Please see Figure 29 for Recommended Bypassing Technique.
相關PDF資料 |
PDF描述 |
|---|---|
| AD8002ARZ | IC OPAMP CF DUAL LP LDIST 8SOIC |
| G180-11 | FAN GUARD METAL 180MM |
| LT1789CS8-10#PBF | IC AMP INSTR SGL PROG R-R 8-SOIC |
| LT1366CS8#PBF | IC OP-AMP R-R IN/OUT DUAL 8-SOIC |
| AD795JRZ | IC OPAMP JFET 1.6MHZ LN 8SOIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD8010ARZ16 | 制造商:ADI 功能描述: 制造商:Microsemi Corporation 功能描述: |
| AD8010ARZ-16 | 功能描述:IC OPAMP CF 200MA LP 16SOIC RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:J-FET 電路數:2 輸出類型:- 轉換速率:3.5 V/µs 增益帶寬積:1MHz -3db帶寬:- 電流 - 輸入偏壓:30pA 電壓 - 輸入偏移:2000µV 電流 - 電源:200µA 電流 - 輸出 / 通道:- 電壓 - 電源，單路/雙路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:8-DIP（0.300"，7.62mm） 供應商設備封裝:8-PDIP 包裝:管件 |
| AD8010ARZ-16-REEL | 制造商:Analog Devices 功能描述:ADSL Driver Single 16-Pin SOIC W T/R 制造商:Rochester Electronics LLC 功能描述:- Tape and Reel |
| AD8010ARZ-16-REEL7 | 功能描述:IC OPAMP CF 200MA LP 16SOIC RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:150 系列:- 放大器類型:音頻 電路數:2 輸出類型:- 轉換速率:5 V/µs 增益帶寬積:12MHz -3db帶寬:- 電流 - 輸入偏壓:100nA 電壓 - 輸入偏移:500µV 電流 - 電源:6mA 電流 - 輸出 / 通道:50mA 電壓 - 電源，單路/雙路(±):4 V ~ 32 V，±2 V ~ 16 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:8-TSSOP 包裝:管件 |
| AD8010ARZ-REEL | 制造商:Analog Devices 功能描述:ADSL Driver Single 8-Pin SOIC N T/R |
發布緊急采購，3分鐘左右您將得到回復。