ADG636
Rev. B | Page 9 of 16
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 4.
Parameter
Rating
VDD to VSS
13 V
VDD to GND
0.3 V to +6.5 V
VSS to GND
+0.3 V to 6.5 V
VSS 0.3 V to VDD + 0.3 V
0.3 V to VDD + 0.3 V or
30 mA, whichever
occurs first
Peak Current, S or D (Pulsed at 1 ms,
10% Duty Cycle Maximum)
20 mA
Continuous Current, S or D
10 mA
Operating Temperature Range
40°C to +125°C
Storage Temperature Range
65°C to +150°C
Junction Temperature
150°C
TSSOP Package
θJA Thermal Impedance
150°C/W
θJC Thermal Impedance
27°C/W
Lead Soldering
Lead Temperature, Soldering (10 sec)
300°C
IR Reflow, Peak Temperature (<20 sec)
220°C
Pb-Free Soldering
Reflow, Peak Temperature
260(+0/5)°C
Time at Peak Temperature
20 sec to 40 sec
1 Overvoltages at EN, A0, A1, S, or D are clamped by internal diodes. Current
should be limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating may be applied at any one
time.
ESD CAUTION