![](http://datasheet.mmic.net.cn/Analog-Devices-Inc/ADG719SRJZ-EP-R2_datasheet_96143/ADG719SRJZ-EP-R2_11.png)
ADG719
Rev. D | Page 11 of 16
TERMINOLOGY
RON
Ohmic Resistance between D and S.
ΔRON
On Resistance Match between Any Two Channels
that is, RON max RON min.
RFLAT(ON)
Flatness is defined as the difference between the maximum and
minimum value of on resistance, as measured over the specified
analog signal range.
IS (Off)
Source Leakage Current with the Switch Off.
ID, IS (On)
Channel Leakage Current with the Switch On.
VD (VS)
Analog Voltage on Terminals D and S.
CS (Off)
Off Switch Source Capacitance.
CD, CS (On)
On Switch Capacitance.
tON
Delay between Applying the Digital Control Input and the
Output Switching On.
tOFF
Delay between Applying the Digital Control Input and the
Output Switching Off.
tD
Off Time or On Time Measured between the 90% Points of
Both Switches, when Switching From One Address State to
Another.
Crosstalk
A Measure of Unwanted Signal That Is Coupled through from
One Channel to Another as a Result of Parasitic Capacitance.
Off Isolation
A Measure of Unwanted Signal Coupling through an Off Switch.
Bandwidth
The Frequency at Which the Output is Attenuated by 3 dBs.
On Response
The Frequency Response of the On Switch.
Insertion Loss
Loss due to On Resistance of Switch.