VDD Most Po" />
參數資料
型號: ADG904BRUZ-REEL7
廠商: Analog Devices Inc
文件頁數: 15/17頁
文件大?。?/td> 0K
描述: IC MULTIPLEXER 4X1 20TSSOP
產品培訓模塊: Switch Fundamentals
標準包裝: 1,000
功能: 多路復用器
電路: 1 x 4:1
電壓電源: 單電源
電壓 - 電源,單路/雙路(±): 1.65 V ~ 2.75 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 20-TSSOP(0.173",4.40mm 寬)
供應商設備封裝: 20-TSSOP
包裝: 帶卷 (TR)
配用: EVAL-ADG904REBZ-ND - BOARD EVALUATION FOR ADG904
ADG904/ADG904-R
Data Sheet
Rev. C | Page 6 of 16
TERMINOLOGY
Table 5.
Parameter
Description
VDD
Most Positive Power Supply Potential.
IDD
Positive Supply Current.
GND
Ground (0 V) Reference.
Ax
Logic Control Input.
VINL
Maximum Input Voltage for Logic 0.
VINH
Minimum Input Voltage for Logic 1.
IINL (IINH)
Input Current of the Digital Input.
CIN
Digital Input Capacitance.
tON (
EN)
Delay between Applying the EN Control Input and the Output Switching On.
tOFF (
EN)
Delay between Applying the EN Control Input and the Output Switching Off.
tRISE
Rise Time. Time for the RF signal to rise from 10% of the on level to 90% of the on level.
tFALL
Fall Time. Time for the RF signal to fall from 90% of the on level to 10% of the on level.
tTRANS
Transition Time. Delay between applying the digital control input and the output switching on.
Off Isolation
The Attenuation between Input and Output Ports of the Switch when the Switch Control Voltage is in the Off Condition.
Insertion Loss
The Attenuation between Input and Output Ports of the Switch when the Switch Control Voltage is in the On Condition.
Crosstalk
Measure of Unwanted Signal Coupled through from One Channel to Another as a Result of Parasitic Capacitance.
P–1 dB
1 dB Compression Point. The RF input power level at which the switch insertion loss increases by 1 dB over its low level
value. P–1 dB is a measure of how much power the on switch can handle before the insertion loss increases by 1 dB.
IP3
Third-Order Intermodulation Intercept. This is a measure of the power in false tones that occur when closely spaced
tones are passed through a switch, and the nonlinearity of the switch causes these false tones to be generated.
Return Loss
The Amount of Reflected Power Relative to the Incident Power at a Port. Large return loss indicates good matching. By
measuring return loss, the voltage standing wave ratio (VSWR) can be calculated from conversion charts. VSWR indicates
the degree of matching present at a switch RF port.
Video
Feedthrough
Spurious Signals Present at the RF Ports of the Switch when the Control Voltage Is Switched from High to Low or Low to
High without an RF Signal Present.
相關PDF資料
PDF描述
ADG612YRUZ-REEL7 IC SWITCH QUAD SPST 16TSSOP
ADG613YRUZ-REEL7 IC SWITCH QUAD SPST 16TSSOP
VE-232-IX-F3 CONVERTER MOD DC/DC 15V 75W
VE-231-IX-F1 CONVERTER MOD DC/DC 12V 75W
VE-22X-IX-F2 CONVERTER MOD DC/DC 5.2V 75W
相關代理商/技術參數
參數描述
ADG904-R 制造商:AD 制造商全稱:Analog Devices 功能描述:Wideband, 37 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 4:1 Mux/SP4T
ADG904SCPZ-EP 功能描述:1GHZ SPST SW (50 OHM TERMINATIO 制造商:analog devices inc. 系列:* 零件狀態:有效 標準包裝:1
ADG904SCPZ-EP-RL7 功能描述:1 Circuit IC Switch 4:1 20-LFCSP (4x4) 制造商:analog devices inc. 系列:- 包裝:帶卷(TR) 零件狀態:有效 開關電路:SP4T 多路復用器/解復用器電路:4:1 電路數:1 導通電阻(最大值):- 通道至通道匹配(ΔRon):- 電壓 -?電源,單(V+):1.65 V ~ 2.75 V 電壓 - 電源,雙(V±):- 開關時間(Ton, Tof)(最大值):10ns,16ns -3db 帶寬:2.5GHz 電荷注入:- 溝道電容 (CS(off),CD(off)):2pF 電流 - 漏泄(IS(off))(最大值):1μA 串?dāng)_:-58dB @ 100MHz 工作溫度:-55°C ~ 125°C(TA) 封裝/外殼:20-WFQFN 裸露焊盤 供應商器件封裝:20-LFCSP(4x4) 標準包裝:1,500
ADG918 制造商:AD 制造商全稱:Analog Devices 功能描述:Wideband, 43dB Isolation 1GHz, CMOS 1.65 V to 2.75V, 2:1 Mux/SPDT Switches
ADG918_08 制造商:AD 制造商全稱:Analog Devices 功能描述:Wideband 4 GHz, 43 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT