
ADL5370
LO GENERATION USING PLLS
Analog Devices has a line of PLLs that can be used for
generating the LO signal. Table 4 lists the PLLs together with
their maximum frequency and phase noise performance.
Rev. 0 | Page 15 of 20
Table 4. ADI PLL Selection Table
Part
ADF4110
ADF4111
ADF4112
ADF4113
ADF4116
ADF4117
ADF4118
Frequency F
IN
(MHz)
550
1200
3000
4000
550
1200
3000
Phase Noise @ 1 kHz Offset
and 200 kHz PFD (dBc/Hz)
91 @ 540 MHz
87@ 900 MHz
90 @ 900 MHz
91 @ 900 MHz
89 @ 540 MHz
87 @ 900 MHz
90 @ 900 MHz
The
ADF4360
comes as a family of chips, with nine operating
frequency ranges. One is chosen, depending on the local
oscillator frequency required. While the use of the integrated
synthesizer may come at the expense of slightly degraded noise
performance from the ADL5370, it can be a cheaper alternative
to a separate PLL and VCO solution. Table 5 shows the options
available.
Table 5. ADF4360 Family Operating Frequencies
Part
Output Frequency Range (MHz)
ADF4360-0
2400 to 2725
ADF4360-1
2050 to 2450
ADF4360-2
1850 to 2150
ADF4360-3
1600 to 1950
ADF4360-4
1450 to 1750
ADF4360-5
1200 to 1400
ADF4360-6
1050 to 1250
ADF4360-7
350 to 1800
ADF4360-8
65 to 400
TRANSMIT DAC OPTIONS
The
AD9779
recommended in the previous sections of this data
sheet is by no means the only DAC that can be used to drive the
ADL5370. There are other appropriate DACs, depending on the
level of performance required. Table 6 lists the dual Tx-DACs
offered by Analog Devices.
Table 6. Analog Devices Dual Tx—DAC Selection Table
Part
Resolution (Bits)
AD9709
8
AD9761
10
AD9763
10
AD9765
12
AD9767
14
AD9773
12
AD9775
14
AD9777
16
AD9776
12
AD9778
14
AD9779
16
Update Rate (MSPS Min)
125
40
125
125
125
160
160
160
1000
1000
1000
All DACs listed have nominal bias levels of 0.5 V and use the same
simple DAC-modulator interface that is shown in Figure 31.
MODULATOR/DEMODULATOR OPTIONS
Table 7 lists other Analog Devices modulators and demodulators.
Table 7. Modulator/Demodulator Options
Part
AD8345
AD8346
AD8349
ADL5390
ADL5385
ADL5371
ADL5372
ADL5373
ADL5374
AD8347
AD8348
AD8340
AD8341
Mod/Demod
Mod
Mod
Mod
Mod
Mod
Mod
Mod
Mod
Mod
Demod
Demod
Vector mod
Vector mod
Frequency
Range (MHz)
140 to 1000
800 to 2500
700 to 2700
20 to 2400
50 to 2200
700 to 1300
1600 to 2400
2300 to 3000
3000 to 4000
800 to 2700
50 to 1000
700 to 1000
1500 to 2400
Comments
External quadrature