參數資料
型號： ADN2818ACPZ
廠商： Analog Devices Inc
文件頁數： 14/40頁
文件大?。?/td> 0K
描述： IC CLOCK/DATA RECOVERY 32-LFCSP
標準包裝： 1
類型： 時鐘和數據恢復（CDR），多路復用器
PLL： 是
主要目的： SONET/SDH
輸入： CML
輸出： CML
電路數： 1
比率 - 輸入:輸出： 1:2
差分 - 輸入:輸出： 是/是
頻率 - 最大： 2.7GHz
電源電壓： 3 V ~ 3.6 V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 32-VFQFN 裸露焊盤，CSP
供應商設備封裝： 32-LFCSP-VQ（5x5）
包裝： 托盤
產品目錄頁面： 788 (CN2011-ZH PDF)
Data Sheet
ADN2817/ADN2818
Rev. E | Page 21 of 40
At medium jitter frequencies, the gain and tuning range of the
VCO are not large enough to track input jitter. In this case, the
VCO control voltage becomes large and saturates, and the VCO
frequency dwells at one extreme of its tuning range or the other.
The size of the VCO tuning range, therefore, has only a small
effect on the jitter accommodation. The delay-locked loop control
voltage is now larger, and so the phase shifter takes on the
burden of tracking the input jitter. The phase shifter range, in
UI, can be seen as a broad plateau on the jitter tolerance curve.
The phase shifter has a minimum range of 2 UI at all data rates.
The gain of the loop integrator is small for high jitter frequencies,
so that larger phase differences are needed to make the loop
control voltage big enough to tune the range of the phase shifter.
Large phase errors at high jitter frequencies cannot be tolerated.
In this region, the gain of the integrator determines the jitter
accommodation. Because the gain of the loop integrator declines
linearly with frequency, jitter accommodation is lower with higher
jitter frequency. At the highest frequencies, the loop gain is very
small, and little tuning of the phase shifter can be expected. In this
case, jitter accommodation is determined by the eye opening of the
input data, the static phase error, and the residual loop jitter
generation. The jitter accommodation is roughly 0.5 UI in this
region. The corner frequency between the declining slope and
the flat region is the closed-loop bandwidth of the delay-locked
loop, which is roughly 3 MHz at OC-48.
相關PDF資料
PDF描述
XRT91L31IQ-F IC TXRX SONET/SDH 8BIT 64QFP
MS27496E19A32S CONN RCPT 32POS BOX MNT W/SCKT
AD9548BCPZ IC CLOCK GEN/SYNCHRONIZR 88LFCSP
V375C36M150BL3 CONVERTER MOD DC/DC 36V 150W
MAX3676EHJ+ IC CLOCK RECOVERY 32-TQFP
相關代理商/技術參數
參數描述
ADN2818ACPZ-RL 制造商:AD 制造商全稱:Analog Devices 功能描述:Continuous Rate 10 Mbps to 2.7 Gbps Clock and Data Recovery ICs
ADN2818ACPZ-RL7 功能描述:IC CLOCK/DATA RECOVERY 32-LFCSP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:28 系列:- 類型:時鐘/頻率發生器 PLL:是 主要目的:Intel CPU 服務器 輸入:時鐘 輸出:LVCMOS 電路數:1 比率 - 輸入:輸出:3:22 差分 - 輸入:輸出:無/是 頻率 - 最大:400MHz 電源電壓:3.135 V ~ 3.465 V 工作溫度:0°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:64-TFSOP （0.240"，6.10mm 寬） 供應商設備封裝:64-TSSOP 包裝:管件
ADN2819 制造商:AD 制造商全稱:Analog Devices 功能描述:Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp
ADN2819ACP-CML 制造商:Analog Devices 功能描述:CDR 2488.32Mbps/2666.06Mbps SONET/SDH 48-Pin LFCSP EP Tray 制造商:Rochester Electronics LLC 功能描述:MULTI-RATE 2.7GBPS CDR/ PA LOW POWER I.C - Bulk
ADN2819ACP-CML-RL 制造商:Analog Devices 功能描述:CDR 2488.32Mbps/2666.06Mbps SONET/SDH 48-Pin LFCSP EP T/R
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*