參數資料
型號: AFCT-5962NGZ
元件分類: 光收發
英文描述: FIBER OPTIC TRANSCEIVER, 1261-1580nm, 155Mbps(Tx), 155Mbps(Rx), BOARD/PANEL MOUNT, DIP, LC CONNECTOR
封裝: ROHS COMPLIANT, DIP-20
文件頁數: 2/16頁
文件大?。?/td> 514K
代理商: AFCT-5962NGZ
10
Figure 8. Recommended Panel Mounting
15.24
(0.6)
DIMENSIONS IN MILLIMETERS (INCHES)
1.
FIGURE DESCRIBES THE RECOMMENDED FRONT PANEL OPENING FOR A LC OR SG SFF TRANSCEIVER.
2.
SFF TRANSCEIVER PLACED AT 15.24 mm (0.6) MIN. SPACING.
;;;;;;;;;;;;;;;;;
14.22 ±0.1
(0.56 ±0.004)
;;
10.16 ±0.1
(0.4 ±0.004)
DETAIL A
;;;;;;
TOP OF PCB
;;
1
(0.039)
;;;;;;
;;;;;;;;;;;;;;;;;
A
SOLDER POSTS
15.75 MAX. 15.0 MIN.
(0.62 MAX. 0.59 MIN.)
SECTION B - B
15.24
(0.6)
B
Recommended Solder and Wash Process
The AFCT-5962TLZ/TGZ/ATLZ/ATGZ/NLZ/NGZ
are compatible with industry-standard wave
solder processes.
Process plug
This transceiver is supplied with a process plug
for protection of the optical port within the LC
connector receptacle. This process plug prevents
contamination during wave solder and aqueous
rinse as well as during handling, shipping and
storage. It is made of a high-temperature, molded
sealing material that can withstand +85 °C, and
a rinse pressure of 110 lbs per square inch.
The process plug should only be used once.
After removing it from the transceiver, it must
not be used again as a process plug; however,
if it has not been contaminated, it can be
reused as a dust cover.
Recommended Solder fluxes
Solder
fluxes
used
with
the
AFCT-5962TLZ/TGZ/ATLZ/ATGZ/NLZ/NGZ should
be water-soluble, organic fluxes. Recommended
solder fluxes include Lonco 3355-11 from London
Chemical West, Inc. of Burbank, CA, and 100
Flux from Alpha-Metals of Jersey City, NJ.
Recommended Cleaning/Degreasing Chemicals
Alcohols: methyl, isopropyl, isobutyl.
Aliphatics: hexane, heptane
Other: naphtha.
Do not use partially halogenated hydrocarbons
such as 1,1.1 trichloroethane, ketones such as
MEK,
acetone,
chloroform,
ethyl
acetate,
methylene dichloride, phenol, methylene chloride,
o r N-methylpyrolldone. Also, Avago does not
recommend
the
use
of
cleaners
that
use
halogenated hydrocarbons because of their
potential environmental harm.
LC SFF Cleaning Recommendations
In the event of contamination of the optical
ports, the recommended cleaning process is the
use of forced nitrogen.
If contamination i s
thought to have remained, the optical ports can
be cleaned using a NTT international Cletop
stick type (diam. 1.25 mm) and HFE7100 cleaning
fluid.
相關PDF資料
PDF描述
AFCT-5962NLZ FIBER OPTIC TRANSCEIVER, 1261-1580nm, 155Mbps(Tx), 155Mbps(Rx), BOARD/PANEL MOUNT, DIP, LC CONNECTOR
AFCT-5962TGZ FIBER OPTIC TRANSCEIVER, 1261-1580nm, 155Mbps(Tx), 155Mbps(Rx), BOARD/PANEL MOUNT, DIP, LC CONNECTOR
AFCT-5962TLZ FIBER OPTIC TRANSCEIVER, 1261-1580nm, 155Mbps(Tx), 155Mbps(Rx), BOARD/PANEL MOUNT, DIP, LC CONNECTOR
AFCT-701SDDZ FIBER OPTIC TRANSCEIVER, 1260-1355nm, 10000Mbps(Tx), 10000Mbps(Rx), SURFACE MOUNT, LC CONNECTOR
AFL12005DZ/HBPBF 2-OUTPUT 80 W DC-DC REG PWR SUPPLY MODULE
相關代理商/技術參數
參數描述
AFCT-5962NLZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFCT-5962TGZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFCT-5962TLZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFCT-5963ATGZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFCT-5963ATLZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: