- 您現在的位置：買賣IC網 > PDF目錄379658 > AG1160A (Electronic Theatre Controls, Inc.) 5V RINGING SLIC PDF資料下載
參數資料
| 型號： | AG1160A |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | 5V RINGING SLIC |
| 中文描述： | 5V的振鈴用戶接口 |
| 文件頁數： | 3/12頁 |
| 文件大?。?/td> | 161K |
| 代理商： | AG1160A |
V1.8 October 2006
Data Sheet
Pin Description
Pin #
Ag1160
5V RINGING SLIC
Silver Telecom 2006
Page 3
Name
Description
1
TIP (A)
Tip.
Connects to the subscriber line Tip.
2
RING (B)
Ring.
Connects to the subscriber line Ring.
3
NC
No Connection.
This pin is not connected internally to the
device.
Power Down.
A logic 1 powers off the DC-DC converter.
Connect to logic 0 for normal operation.
No Connection.
This pin is not connected internally to the
device.
Loop Off.
A logic 1 removes the loop current from the line.
Connect to logic 0 for normal operation.
Ringing Mode.
Sets bias conditions during ringing. Must be set
to logic 1 during ringing.
4
PD
5
NC
6
LO
7
RM
8
GND
A
Analog Ground.
Normally connected to system ground.
9
+5V
A
Analog Supply.
This pin must be connected to the +5V supply
via an RC filter, to supply power to the analog circuits.
No Connection.
This pin is not connected internally to the
device.
No Connection.
This pin is not connected internally to the
device.
No Connection.
This pin is not connected internally to the
device.
Audio In.
This is the analog input signal from the Codec (which is
output on Tip and Ring). Connected via a 100nF capacitor.
Slew Rate Capacitor.
A capacitor is fitted between this pin and
GND to control the battery reversal and the ringing slew rate.
220nF is recommended.
Audio Out.
This is the analog output signal (from Tip and Ring)
to the Codec. Connected via a 100nF capacitor.
Forward/Reverse.
A logic 0 will reverse the Tip and Ring voltage
polarities. F/R is toggled to produce the ringing output.
10
NC
11
NC
12
NC
13
V
IN
14
CAP
15
V
OUT
16
F/R
17
SHK
Switch Hook.
Indicates an off-hook condition when at logic 1.
18
GND
PWR
DC-DC Ground.
Internal ground for the DC-DC converter.
19
V
PWR
DC-DC Supply.
+5V input for the DC-DC converter.
20
GND
PWR
DC-DC Ground.
Internal ground for the DC-DC converter.
21
V
PWR
DC-DC Supply.
+5V input for the DC-DC converter.
相關PDF資料 |
PDF描述 |
|---|---|
| AG1160A-48 | 5V RINGING SLIC |
| AG1170 | +5V / +3.3V Low Power Ringing SLIC |
| AG1170-D3 | +5V / +3.3V Low Power Ringing SLIC |
| AG1170-D5 | +5V / +3.3V Low Power Ringing SLIC |
| AG1170P-D3 | +5V / +3.3V Low Power Ringing SLIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AG1160A-48 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:5V RINGING SLIC |
| AG11692 | 制造商:Molex 功能描述:LOCKNUT PG9 *52003500* |
| AG1170 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:+5V / +3.3V Low Power Ringing SLIC |
| AG1170-D3 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:+5V / +3.3V Low Power Ringing SLIC |
| AG1170-D5 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:+5V / +3.3V Low Power Ringing SLIC |
發布緊急采購，3分鐘左右您將得到回復。