
The AIP-8d card provides eight channels of 12 bit analogue inputs.
The inputs range from ±50mV to ±5 volts, or 0 to +10 volts full scale.
The card features user selectable base address, interrupt source,
interrupt level and an on-board timer. The timer may be used as a
pacer clock to control A-D conversion cycles
DATA
ACQUISITION CARDS
AIP-8d
8 Channel Analogue to Digital Card
User selection base address, interrupt level and on-board timer
which can be used to control A to D conversion cycles
12μS conversion time
25 way male D type connector
3 x 16 bit timers (82C54)
Power requirements 5V d.c. at 150mA
Technical Specification
Analogue Inputs
Number of Analogue Input Channels: 8 (Single Ended)
Voltage Input Range:
Programmable Gains:
System Conversion Time:
A-D Conversion Time::
Resolution:
Measurement Accuracy:
+5V Range
+10V Range
±5V Range
Input Common Mode Range:
Data Transfer Modes:
Data Ready Flags:
Interrupt Channels:
From ±50mV to +10 Volts or, ±5 Volts
x1, x10, x100
12μS min
3μS
12 bit
0.1% FS +/-4 Counts
0.1% FS +/-4 Counts
0.1% FS +/-4 Counts
±12 Volts
I/O Ports
Interrupt or Polling
IRQ-2 to -7
Timers
Number Of Timer Channels:
Timer 0:
Timer 1:
Timer 2:
3
Feeds Timer 1
Feeds Timer 2
Pacer For A-D Conversions TIMER 0
(Output Feeds TIMER 1 Clock)
250nS
500nS
16.384mS
Timer 0: Resolution
Minimum Time Interval:
Maximum Time Interval:
Timer 1:Resolution (Cascade from TIMER 0) 500nS
Minimum Time Interval:
Maximum Time Interval:
1μS
32.768mS
Timer 2:Resolution (Cascade from TIMER 1) 1μS
Minimum Time Interval:
Maximum Time Interval:
2μS
65.535mS
Combined Timer Limits (Time Between Start Converts)
Minimum Time Period
Maximum Time Period
Board Connections
Analogue Input Signals:
Bus:
2μS
2.23 years
1 x 50 way male D-type
PC 8-bit ISA
Chowley Oak,Tattenhall, Chester, Cheshire, CH 9EX, UK
Tel: +44 (0) 1829 772000
Facsimile: +44 (0) 1829 772001
E-mail: sales@bluechiptechnology.co.uk
Web: http://www.bluechiptechnology.co.uk
BS EN ISO 9001
Certificate No 33069
YEAR
WARRANTY
All trademarks and registered trademarks are acknowledged as the property of their respective owners. Specifications are
subject to change without notice. All information is believed to be accurate and reliable however Blue Chip Technology
accept no liability whatsoever for any event or action resulting from its use.
Options
Windows
3.1 DLL driver